Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i've just put new EFS springs in the front and i'm looking at shocks to put at the moment. I currently have ironman 12635GR shocks which are stuffed. Compressed 307mm Extended 485mm.
I'm looking at the the Bilstein 5100's Compressed 304mm Extended 470mm.
The ironman's look like they fit with the new springs though that are just about fully extended which makes me think the Bilsteins won't fit and i'll have to go the 4" spec. But is that too big? were my old shocks too short?
Here is a pic as of today if this helps.
i have no idea how much lift i have. Please help. thank you.
I have posted this on 4wdaction as well but last i checked it didn't seem as active as this site.
TheBigBoy wrote:Cycle the suspension, its THE ONLY WAY.
he's right . need 2 flex it up max measure compressed lenght then let susp full drop to extened lenght . make sure shock dosn't bottom before hitting bump stop .easy..
