Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Guy below is a link to Wayne's spring tech thread from Pirate 4x4.. Wayne is one of the top tuners in the States and has been Navi for Ben Napier the past few yrs, tuning all the top Ultra4's.. I have met wayne and the knowledge this Man has is unbelievable. I have also asked Wayne if I can help him tune at KOH 2013 - when i say help i mean watch the master in action, I had a reply last night and its good to go ..
I thought i would share as with more and more Aussies fitting coilovers and wanting to go faster this is something you need to read.
AFeral wrote:Intresting read,
I'm of to the shed to measure my springs.
I orginally posted this up because i read one of the threads on here where a mate was try to get quotes on some rediculaous weighted springs.. So i thought i would share with everyone. I hope you take something out of it AFeral ... as wayne knows what his talking about and the best thing his willing to share his knowledge with anyone that asks .. A true sign of a Good Bloke i say..
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Measured my springs and there the correct length accourding to Wayne's info. Will have to calculate some rates to see if there in the correct rate range. But seeing as I don't even have time to fit the front ones cannot see this happening in a hurry.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
.. 