Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
putting ford xf Ute leaf sprints in a hilux
Moderators: toaddog, Elmo, DUDELUX
putting ford xf Ute leaf sprints in a hilux
Well you need to redrill the center bolt back a bit then move the back chassis mount back till it's flat on the chassis has to be custom made out off 4mm rhs teel cause there 65mm wide not 60 and use u bolt flip kit and 200mm shackles and you to can get out there in the hilux if done right beat some off. Them mates in the potrols
Re: putting ford xf Ute leaf sprints in a hilux
That was a little hard to read.
The way it reads is
- you are putting falcon springs in a hilux by redrilling the springs
- chassy has to be custom made out of 4mm rhs steel
- they are 65mm wide not 60 with flip up kits and 200mm shackles
- and you beat off your mates with patrols?
Mmm.. Possibly need to read before positng or after and edit it..
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: putting ford xf Ute leaf sprints in a hilux
Yes, a little hard to read, and belongs in Toyota, not General.
Who is online
Users browsing this forum: No registered users and 0 guests