I have done my research and havent come up any good so i thought i would just through a post up. Have a TD42 with one of our own 12mm pumps. Im looking at upgrading my turbo. I have a three that im choosing between but i would like some advice from people who have had these turbos or have. So im resetting up my pump with 70cc no boost and 150cc at 30psi. Maybe a little smokey off the mark but i dont mind. Im building a flowed exhaust manifold and big intake manifold with a front mount cooler. So the turbos im tossing up between is the GTX3071, GTX3076 and a GTX 3582. I think the 3582 will be too big. But if someone has run one on a TD42 how did it proform. I have been told im making a crack snapper but thats why i got 2 TDs sitting down on a crate at work. All these turbos will have the .64 exhuast housing as the .82 will be too big from what i have been told.
Cheers in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo Advice
Turbo Advice
1996 HZJ75RP, DTS turbo with 3inch exhaust, rear locker, MTZs, 2inch shackles, 2 inch custom packs!
Who is online
Users browsing this forum: No registered users and 65 guests