Hi, somebody here has a ute in the drive way .
Need the measurement from the front bumper to the rear of the back tyres.
Trying to see if a ute will fit inside a tipper body we have to sort some transport
Any help be great
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hj47 fj45 need measurement ASAP
Moderators: toaddog, Elmo, DUDELUX
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER
Re: Hj47 fj45 need measurement ASAP
4120mm O/A from very front of bullbar to rear of back tyre. excluding winch roller fairlead..
front of bullbar, that would add at least a 100mm, if you didnt have one.
and i run 33 inch tyres..
front of bullbar, that would add at least a 100mm, if you didnt have one.
and i run 33 inch tyres..
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
WORTH LOOKING AT WORTH LOOKING AFTER
Re: Hj47 fj45 need measurement ASAP
That's what I was after, tray body is 4200 long so will fit on with a bit left. Chassis can over hang
Thanks for your help
Thanks for your help
Who is online
Users browsing this forum: No registered users and 6 guests