hey everyone
I've got air over hydro rear brakes with(for lack of better words) a knob to fade out the rear brakes for front diggs
now I've changed the seals on the rear brakes go to bleed them the normal way and there just isnt much pressure
it's confusing after I pump them abit there's some pressure
was gonna try reverse bleeding
its on my hilux comp truck and I've never across air hydro rear brakes
if anyone knows anything to help it would be great
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
No Brake Pressure
Moderators: toaddog, Elmo, DUDELUX
Re: No Brake Pressure
if you pump up means air in the system still
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Re: No Brake Pressure
If its drums on the rear make sure the adjustment is right up. Too much shoe travel will make it very difficult to bleed.
Re: No Brake Pressure
Nah its got a disc brakes on the back
there must be air way up the line
I'm gonna give reverse bleeding a go
there must be air way up the line
I'm gonna give reverse bleeding a go
Who is online
Users browsing this forum: No registered users and 2 guests