Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

H4 switch doesn't engage 4x4

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3
Joined: Mon Apr 26, 2004 11:22 am

H4 switch doesn't engage 4x4

Post by wooky »

Hey guyz,

I have an 85 fj62 cruza, and with both front hubs in the LOCK position, I cant engage 4x4 by pushing the H4 switch.

Werkt fine last w/e, drove to work, now no 4x4.

Any comment are greatly appreciated..
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Check your vaccum lines to the actuator on the transfer case front output housing or the elec operated vaccum switch .

Wally.
Top
Posts: 3
Joined: Mon Apr 26, 2004 11:22 am

Post by wooky »

H4 swotch now werks, it was a split vaccuum hose at manifold.

Thanks mate..
Top
Posts: 3
Joined: Mon Apr 26, 2004 11:22 am

H4 switch fixt

Post by wooky »

H4 switch now werks, it was a split vaccuum hose at manifold.

Thanks mate..
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests