hi
read all info on K&N etc. Unfortunately i have not got black box just normal car pancake air filter. Should i fit black box if so how or should i adjust what i got
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
F300 Black Box
Moderator: Tiny
Firstly, I will assume you are running an EFI Feroza.
The question is, what kind of wheelin' and road driving do you do, and what size tyres are you running?
If you're running standard tyres, then I wouldn't worry too much about it. If you're doing a lot of rock-crawling in steep country, then it will probably help to have it. Although you will find you top-end performance may suffer a bit.
You should be able to find one from a wrecker or even from Daihatsu as a guenuine replacement part....it should just bolt straight on to the top of your motor, even the motor from the Applause has the bolts and holes in the right place.
Good luck,
The question is, what kind of wheelin' and road driving do you do, and what size tyres are you running?
If you're running standard tyres, then I wouldn't worry too much about it. If you're doing a lot of rock-crawling in steep country, then it will probably help to have it. Although you will find you top-end performance may suffer a bit.
You should be able to find one from a wrecker or even from Daihatsu as a guenuine replacement part....it should just bolt straight on to the top of your motor, even the motor from the Applause has the bolts and holes in the right place.
Good luck,
bru21 wrote:What happens in goat, stays in goat!
now very sad
The extractors for the EFI model will fit- you'll just need to plug up the oxygen sensor hole (easy job). There may even be extractors made to suit the HD-C engine without the threaded hole?
You may be able to find a K&N filter to suit as well. It all depends on what size the HD-C engine filter is - K&N make a huge of filters.
You may be able to find a K&N filter to suit as well. It all depends on what size the HD-C engine filter is - K&N make a huge of filters.
David
Who is online
Users browsing this forum: No registered users and 2 guests