Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need info on engine conversion
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Need info on engine conversion
hi guys I want to put an injected VL motor into my GQ patrol. Does the VL motor bolt up to the gear box? Do I have to change engine mounts etc... As I have to wire up the computer and O2 sensor do I have to run the Airflow meter? Any info on this project would be greatful as I will be doing it all myself. Cheers
Proud memnber of RT4WD Club!! & MUD DUCK!!
Re: Need info on engine conversion
If you currently have the RB30 carb engine, I believe the VL engine will bolt in using the patrol sump and engine mounts.
When you wire up the computer, you will pretty much need to fit it as it comes out of the Holden engine bay, including the airflow metre and oxy sensor.
When you wire up the computer, you will pretty much need to fit it as it comes out of the Holden engine bay, including the airflow metre and oxy sensor.
The old Luxy was fun, but with a young family comes great responsibility.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
Re: Need info on engine conversion
Yep patrol has a sick rb30.
Leigh you'd have to wire it the same way it comes out
Leigh you'd have to wire it the same way it comes out
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Re: Need info on engine conversion
Pm sent . Any problems pm me
Now with locked diff to keep up with rav4s
Re: Need info on engine conversion
The vl motor fill bolt up.
You will need to swap the sump, dip stick (theres a brass driff towards the back of the motor), front pullys, crank ets if you want to run air con etc. If you decide to do the clutch - use a vl one as there the same as a GQ - but half the price. ( I had a vendor pull 2 kits apart and he confirmed the part numbers. ( I put a RB30 into a MK patrol a while back). I susgest you get you hands on a rb30 out of a skyline, as the loom is separte and easier to do compared to a vl. (be aware that the dizzys are differant vl - skyline rb30)
I would also do the timing belt while you have the motor out.
You can also put the fuel injections bits on the carby motor - save pulling the motor out.
As above you will need the efm and a oxy sensor - or you will chew the juice.
You will need to swap the sump, dip stick (theres a brass driff towards the back of the motor), front pullys, crank ets if you want to run air con etc. If you decide to do the clutch - use a vl one as there the same as a GQ - but half the price. ( I had a vendor pull 2 kits apart and he confirmed the part numbers. ( I put a RB30 into a MK patrol a while back). I susgest you get you hands on a rb30 out of a skyline, as the loom is separte and easier to do compared to a vl. (be aware that the dizzys are differant vl - skyline rb30)
I would also do the timing belt while you have the motor out.
You can also put the fuel injections bits on the carby motor - save pulling the motor out.
As above you will need the efm and a oxy sensor - or you will chew the juice.
Re: Need info on engine conversion
If you want to go a little different but just as easy as upgrading to a VL motor if you don't go off road a lot go a RB25det, straight bolt up to gearbox and mounts and has a lot more power standard and cant produce a lot more with a tune and some goodies...
Mark.
Mark.
Its not cool, unless it's got boost :)
Who is online
Users browsing this forum: No registered users and 85 guests