Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15inch rims on 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 69
Joined: Wed Feb 10, 2010 10:48 pm
Location: yeppoon qld

15inch rims on 80 series

Post by dave89 »

Hey i was woundering if 15 inch rims fit on a 97 mod 80
Top
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: 15inch rims on 80 series

Post by stilivn »

Not without grinding a few mm off the front calipers.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Top
Posts: 69
Joined: Wed Feb 10, 2010 10:48 pm
Location: yeppoon qld

Re: 15inch rims on 80 series

Post by dave89 »

cheers mate might just keep the 16s
Top
Posts: 255
Joined: Tue Oct 26, 2010 3:22 pm

Re: 15inch rims on 80 series

Post by Baja Burley »

I have fit 15's on the front no worries at all. 15's on the back however, needed wheel spacers for clearance on the brake caliper
Top
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: 15inch rims on 80 series

Post by stilivn »

Baja Burley wrote:I have fit 15's on the front no worries at all. 15's on the back however, needed wheel spacers for clearance on the brake caliper
My bad, knew it was one of them. Wheel spacers are illegal on road so just depends if you wanna run the risk.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Top
Posts: 69
Joined: Wed Feb 10, 2010 10:48 pm
Location: yeppoon qld

Re: 15inch rims on 80 series

Post by dave89 »

if ya changed ya offset to a negative offset would that work
Top
Posts: 2
Joined: Sun Apr 28, 2013 11:33 am
Location: Sunny Coast, Qld

Re: 15inch rims on 80 series

Post by Komitted »

It would have to be a huge negative offset to clear the callipers and tie rods...yes you can grind the callipers a few mm, but be careful doing this as far as legality and insurance purposes goes...you don't want to make any unnecessary donations to the DOT fund. Depending on the style of rims you're after, there are alternatives in 16's available for the 80. :cool:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 94 guests