Am i on the right track with this loom
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
arb comp and solenoid wiring
Moderator: -Scott-
arb comp and solenoid wiring
hey guys i need to wire up my compressor and locker solenoids through 2 position switches.
Am i on the right track with this loom
Am i on the right track with this loom
Re: arb comp and solenoid wiring
That doesn't have any "interlocking" of the lockers i.e. each can be operted independently of the other. If this is what you're after then it looks good to me.
Re: arb comp and solenoid wiring
That is what I was chasing so I can use cutting brakes. Thank you very much for verifying
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER
Re: arb comp and solenoid wiring
if your using the compressor alot, keep an eye on the terminals at the compressor END..
ive had mine melt, on the current single compressor, and the OLD SCHOOL compressor.
same spot.
ive had mine melt, on the current single compressor, and the OLD SCHOOL compressor.
same spot.
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
WORTH LOOKING AT WORTH LOOKING AFTER
Who is online
Users browsing this forum: No registered users and 0 guests