Has anyone ever heard of or looked into wether or not cruiser and patrol detroit lockers have interchangeable side gears?
I'd like to build up a 60 series/gq hi pinnion hybrid front diff with a detroit if its possible
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Detroit lockers
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Detroit lockers
I thought detroits for patrol diffs were discontinued some time ago.
Try ringing your nearest Eaton-Spicer outlet and asking them to check part numbers.
Try ringing your nearest Eaton-Spicer outlet and asking them to check part numbers.
My friends aren't holding me back..... I'm pulling 'em forward.
Re: Detroit lockers
Detroits are still available for a patrol, Harrop are eaton dealers. Eaton bought the "detroit locker" design and name.
A harrop dealer's price is close to $1300 for one. so buying two to build a bitsa if you are getting trade prices is in the vicinity of $2600
probably cheaper to do something else.
Have you checked the spline diameter and count on Patrol Vs Cruiser? you might find they slip straight in. dont forget to also measure the distance inside the centre between the ends of the axles.
A harrop dealer's price is close to $1300 for one. so buying two to build a bitsa if you are getting trade prices is in the vicinity of $2600
probably cheaper to do something else.
Have you checked the spline diameter and count on Patrol Vs Cruiser? you might find they slip straight in. dont forget to also measure the distance inside the centre between the ends of the axles.
Who is online
Users browsing this forum: No registered users and 92 guests