Hi
I have changed my Gq ute from td4.2 to td4.2t from a 02 Gu every thing went smoothly but I have come the fuel pump wiring and found the Gq has a 2 wire supply to the pump and the Gu pump has 3 wires I realise that 2 of the wires will be the solenoid and the other I'm not sure about any help would be appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Td4.2 to td4.2t fuel pump wiring
Re: Td4.2 to td4.2t fuel pump wiring
As I thought all full of great ideas
Re: Td4.2 to td4.2t fuel pump wiring
Need to get rid of the black nats module that covers the solenoid.... then attach the brown wire on your loom to the top of the solenoid.... only need one wire. the other 2 wres on the GU pump are sensor pickups for the security system.
Who is online
Users browsing this forum: No registered users and 0 guests