Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

75 series chopped front guards

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 593
Joined: Mon Aug 31, 2009 9:02 am
Location: gracemere, no where near mt morgan

75 series chopped front guards

Post by Shieldsy »

Alright
Might be a thread on this but I can't find it..

What have you guys done with chopping your front guards? I got a couple ideas and will post pics soon but just keen to see what someone else has done

Cheers
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.

ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: 75 series chopped front guards

Post by hulsty »

I chopped about 60mm out of the top of mine then sliced and raised the inner guard to suit.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 593
Joined: Mon Aug 31, 2009 9:02 am
Location: gracemere, no where near mt morgan

Re: 75 series chopped front guards

Post by Shieldsy »

Image

My idea is to cut the lower inline with the top of the brush bar, welding some panel steel or whatever in there, and run small tube front the front bar up to meet the rail to give it strength

Thoughts?
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.

ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Top
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER

Re: 75 series chopped front guards

Post by CRUZAAMAD »

Only real way is too use the cams rated pipe on the one off the bar meeting the side rail.
little bit of laminating it would be good but that grade of pipe at a decent diameter and wall thickness should be fine on its own
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests