Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

My lux is having strange starting problems...Please Help!!

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

My lux is having strange starting problems...Please Help!!

Post by Toyo Truck »

Hey Guys,

I've read the starting troubleshooting guide in the
"Auto Electrical Topics" section at the top of the page,
but after tonights testing, I'm stumped....

Sat night, went to go wheeling on a night mission.
1. Drove all the way to Windsor from Sydney,
no major probs except for the occaisional splutter??
2. Got to Windsor BP, stopped car, filled up, started OK and left.
3. Phone rang, pulled over to find/answer it and while talking,
switched off car.
4. Engine Off for 2 mins, tried to start motor...got reds, lights and all
but nothing at all on key start? (Checked terminals = OK, little dirty)
5. Got jump-started by Ryan, started first go, ran OK cept for occ splutter.
Got home, switched off...car would not start againg (no click at all on key)
6. EASTER SUNDAY and PUB HOL MONDAY - Drinking and Eating
7. TONIGHT - Tested battery cold = 12.56V
8. Tried to start...click.. no start...SMOKE FROM +VE TERMINAL if key is held for 1-2 sec???? :shock:
9. Jump started from 400CCA starter pack, Starts first go, idles fine?? Measured volts at 14.00 and climbing slowly (14.01,02,03,04)
10. Ran car for 5 mins, switched lights on = 13.91V.
11. Turned spots+lights on = 13.03 and dropping quickly (to 12.78 after 10secs)
12. Turned spots off = 13.78, turned all lights off = 14.10. Switched off.
13. Started car...Start First go. Turned engine off after 20 Secs
14. Started car...Srart first go. Turned off aft 20 secs
15. Started car....FIRST GO.

Can anyone help me with this evil electrical problem?
Battery is a Rocket something or rather with 460CCA, 6 months old.
could it be faulty? Ryan has the same batt and he's having very similar
issues with his.

Cheers,
Bart
Last edited by Toyo Truck on Tue Apr 13, 2004 9:39 am, edited 2 times in total.
The Lux is back. New and Improved v2.0!
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

to me it sounds like you arnt gettin a flat battery.
i had the same problem with my 3l.
had all the same syptoms.
1st i had startermotr rebuilt. wich it needed
it helped but didnt fix it so went back and they put a relay on the ignition wire. and i havnt had the problem back since.
it turns out the igniton switch is dogy in hilux as they age so u can get a new barrel etc but then u will have differnt key to start the car to the one on your doors. i also had to replace the battery becuase of it going flat from tryin to start the car so many times.

hope this helps
Cheers, Hayden!
________________
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

Post by Toyo Truck »

Yeah? That's a bummer.
Did it start happening all of a sudden?? Cause mine did.
I've got a little bit of that greenish gunk on the terminals,
so I'll clean that off and might get the batt. load tested just
to cross that off the list. Also going to test the alternator when
I get a chance too, see if that's charging OK.

So you say a relay in the ignition wire is the go? Might give it a go
if everything prooves to be working OK once started.

It's a very strange and extremely annoying, especially when you
get about 2M from the hard stuff :bad-words: and have to park it.
Did your car splutter occaisionally too, almost like it wasn't getting enough spark?? (This may be an urelated problem, it just started at
the same time as this prob).

Regards,
Bart
The Lux is back. New and Improved v2.0!
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

Bart,

When i bought my lux, the previous owner told me that it had the problem and only does it everynow and then.....which it did a few cranks of the key and it would start usually...bit harder when its hot thow. He said all it needed was new bush's in the starter...went on for botu a month before i got sick of it cause it just got worse...and i foudn it was killing my very good battery i had bought. Bein a diseal they use alot of cranking power. im not sure if the petrols use as much. so i was just having too much voltage drop while trying to start... its common as they get older..... as i said i took it 2 2 auto elecs that stuffed me around saying yes this is the problem all fixed...$400 later and 2x bein pulled out i still had the problem. I foudn another auto elec and he said that no one had dun anythin excpet replace the bushs... so he rebuilt it ALL!!!! it helped alot till but it eventually came back....so took it back to him and he said sweet just a relay on here and new good battery that hasnt been damaged.. nad i have not had 1 problem since!

i didnt get any spluttering as the diseal dun use much power to run the motor... i think u may have the same problem but bein a petrol and your battery is bein damaged every time it drains and dosnt start. it may be drawin a heap from battery that already is damged.

hope this all make sense:) i carnt see wot size relay they installed but id guess its a big one. try it an see if it helps... check ur starter motor out...and still does it get ur battery checked!

sorry bout the esay to read :)
Cheers, Hayden!
________________
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

double post
Last edited by ORSM45 on Tue Apr 13, 2004 9:13 pm, edited 1 time in total.
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

double post
Last edited by ORSM45 on Tue Apr 13, 2004 9:13 pm, edited 1 time in total.
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

if your getting 14Vs from your alternator its fine. 12.56V on a 'cold' battery are fine too (6 cells x 2.1V per cell). and those voltage drop figures on your headlights are normal.

MaccA
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

I had the same prob with my old lux with the 3Y motor in it. The starter motor bushes were dying, solved that problem by whacking the starter motor with a big pole when it clicked but didnt start. That worked for a year then i had to get the starter motor rebuilt cuz it was chockas with mud and other crud. Then after I had it rebuilt it just started clicking again, i checked the batt. cold it had 13v, tried to start it....click....jump started fine, Got to work and checked the batt. and it had a collapsed cell, so when i was trying to start it the battery was dropping to 2 v. Replaced the batt and it was fine
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

Post by Toyo Truck »

Cheers for all the great info guys,

Took apart (completely) terminals, washed in bicarb of soda as NAM states in the FAQ section,
Disconnected all aux. items light spots, compressor and locker air-valves.
When I re-connected it all, it started first go, and hasn't had the problem since.

I'm just a bit worried about the gas/steam that was coming off the -ve terminal when holding
the key on, but no starter motor or click was heard?? Wheres the best place to get a batt tested?
How much does it cost??
Like you guys say, this may be the start of an evil recurring electrical issue, at least I have something to work with now!!

Bart
The Lux is back. New and Improved v2.0!
Posts: 928
Joined: Tue Apr 06, 2004 5:42 pm
Location: newy

Post by customhilux »

check ya starter lead, cause it could be covered in shit, if so upgrade to a bigger size,

but it sounds like it's something to do with ya starter motor.
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

1 question ....is the engine "hot" when it wont crank?
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

This doesn't sound to me like it would have to be the starter motor, it sounds to me like shitty connections and/or inadequate cable.

Jason
This is not legal advice.
Posts: 481
Joined: Fri Jan 16, 2004 2:42 pm
Location: WA

Post by the_smoo »

Next time it farks up, whack a multimeter on ur fender and crank the engine whilst watching the meter...

If it falls below 9-10 volts, the battery is probably ted. Quite often batteries will show good volts cold, but be rooted when they have to supply a load.


The only difference between your battery starting the car and the jump start is the batteries ability to supply current. If no problems with the jump pack, you would assume the battery?
now in Perth
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

If its smoking on a terminal then there is a resistive connection allowing power to dissipate.
Terminals should not get hot.
CLEAN and ensure tight, all cables terminated, battery clamps touching all around.

Bazzle
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

bazzle wrote:If its smoking on a terminal then there is a resistive connection allowing power to dissipate.
Terminals should not get hot.
CLEAN and ensure tight, all cables terminated, battery clamps touching all around.

Bazzle


As Bazzle said you've got to have resistance in the connection for it to heat up like that. Get your battery connections/ cables sorted first and then see how you go from there.
David
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

Post by Toyo Truck »

Yeah that's what I was thinking. I just wanted to make sure that the smoking terminal was normal.
Anyway, I gave it the bi-carb of soda treatment, and took apart, cleaned with bi-carb and steel wool, and reassembled both terminals and now the starting problem seems to be gone for now. I have now reconnected the accessories, and it still seems to be working fine.
However, I am now having a problem with the fuel delivery to the carby!!! It just gets better...

Thanks for your suggestions though,
Bart
The Lux is back. New and Improved v2.0!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest