Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

I want to put an auto behind my 6.5l Chev

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2
Joined: Mon Jul 11, 2011 7:28 pm

I want to put an auto behind my 6.5l Chev

Post by sandycans »

I was hoping you guys could help me out. I have a GU patrol with a 6.5L Chevy diesel in it, It currently runs a patrol manual gear box but I would like to change to an auto. My question is what auto gear box is best and what would I need to do to fit it. Thanks
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: I want to put an auto behind my 6.5l Chev

Post by turps »

Well there is a couple of options. Since you already have it mated to a Patrol gearbox. I would imagine it would be pretty easy to make it fit to a Patrol 4spd auto. The 4 spd auto out of a GU is better. As they have a bigger torque converter. But basically the same box.

The other option would be to go some form of GM auto (th350 or th400). They should bolt up to the 6.5lt. Then just need an adaptor to the patrol transfercase.
THOUGHT FOR THE DAY....
Posts: 15
Joined: Mon Sep 16, 2013 10:15 pm

Re: I want to put an auto behind my 6.5l Chev

Post by ZAPPAGU »

Hi mate, what you needs is a 4l80, was standard fitment behind the 6.5td, they are basically a th400 with an overdrive. Very strong box standard. You can either run them full manual or get a standalone comp to drive it. They are big boxes, marks do a transfer kit to the transfer.
I've just put a ls1 and 4l80 in my dual cab, love the auto. Do a lil research as far as length goes. My transfer ended up being 56mm further back, so tailshafts had to be modded. The t700 is shorter than the 4l80, just not as strong standard, you would want it freshened and strengthened slightly before fitment.
I have a t700 with conv sitting in my shed that came off a 6.5 in a 4wd chev truck, would need a freshen and is not an electric box so hook up kick down and away you go, no computer to worry about. Would be ideal for you just that I'm in wa!
Cheers
Karl
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: I want to put an auto behind my 6.5l Chev

Post by Skegbudley »

The 4 speed auto works well. You just need a better than standard torque converter.
GU Patrol with go better bits added
Posts: 35
Joined: Fri Dec 14, 2007 9:44 pm
Location: Kellyville

Re: I want to put an auto behind my 6.5l Chev

Post by DA22LE »

After having put a TH400 in my SWB Mav, I wished I'd gone for a $2000 carbon twin plate clutch, and a gearbox re-co....
Woulda been heaps cheaper.....

Transfer case is sitting about 125mm further back, which is on the limit for tailshaft shortening in a SWB.....

Having said that, the full manual box, and 3g stall is just about perfect for my vehicle. Should pull a high 12/low 13 1/4 mile....
Just have to sort out some niggling problems......

Cheers

:cool: Daz :cool:
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests