Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Group Buy, 63% transfer reduction for GQ/GU

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Group Buy, 63% transfer reduction for GQ/GU

Post by love ke70 »

Permitted by tiny :)

ITEM: 63% transfer reduction gears for GQ and GU patrol

PRICE AND PRICE CONDITIONS: $1300 + post. Yes thats cheaper than marks sell their kits for, and its a new custom run.

CONDITION: Brand spanking new

REASON FOR SELLING: I wanted a set for myself and the only way of getting them made is in a group buy of 15 sets.

EXTRA INFO: Hi guys, for a long time I have been thinking about reduction gears for my GQ, especially after wheeling with some mates with cruiser utes and the much lower gearing they have.
I did the maths, and a 43% reduction brings the gearing only just lower than a standard cruiser, but the other available option of 85% by marks 4wd is a huge step down and will result in much stopping and transfer leaving tossing.

So I contacted Marks about making something in the 60-65% area, after reading a thread on here about that. After a bit of to-ing and fro-ing they decided they can make a 63% ratio and sell it as a kit exactly the same as their other kits, as seen here
Nissan 43% Low Range Transfer Case Gears

Kit contains:
· Input gear
· Idler gear
· Output gear
· Bearing spacer
· Welsh plug
· Backlash eliminator
· Instructions
All GQ and GU vehicles run the same gearing in the transfer case. We haven’t confirmed this with the 2012 and onwards vehicles that were fitted with traction control.

As some people may be aware, its commonly reported you have to die grind a small amount inside the casing to fit the 85% gears, according to marks this can be the case with the 43% as well, and the 63% will also fall into this category that some people depending on the casting will have to die grind a small amount inside the casing to maintain clearance.

the ratio according to Marks is about 3.29:1

I should mention, this is at the moment an expression of interest, I need to get enough interest to make this work, Please do not say you will buy if you are not going to come through, once I feel there is enough interest I will collect deposits and place the order with Marks 4wd. If it all falls apart after I start taking deposits I will of course fully refund any deposit taken.


LOCATION: Yatala, will post all over the world

CONTACT: PM, reply, or andy on 0433 108 569

PICTURES: much the same as seen here:
Image

Interested parties
1. Love ke70, Andy
2. Thrasher, Dave
3. Patrol 28


If your name is on this list and you feel you will not actually come through with the deposit and payment when it comes that time, please ask me to remove your name from the list. This is much preferable to people not making payments at the end and letting everyone down.


Cheers, Andy
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests