Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Damaged upper control arm

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Damaged upper control arm

Post by pridhac »

My 80 series has a 4" lift with adjustable upper control arms. Looking at the drivers side arm the other day I noticed the lock nut was loose and found that it wont tighten up. It looks like it been loose for a while and has let water and crud into the thread and has rusted out, so tightening the nut just mushrooms the end of the front half of the arm.

Whats the simplest way to fix it? Can the arm be repaired?

Any one had this problem before?
Top
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Re: Damaged upper control arm

Post by BUSTED100 »

my 105's the same, tore the thread out :(
weld it up, all good
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Re: Damaged upper control arm

Post by pridhac »

Thanks Busted.

I'll pull it off and get the welder out :-)
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Re: Damaged upper control arm

Post by pridhac »

Still havent pulled this out to fix it, and of course no-one will sell one control arm....
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 115 guests