Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Triton rear ends

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 36
Joined: Fri Nov 07, 2003 7:49 am
Location: canberra

Triton rear ends

Post by alanc »

Hi Triton people,
Do any of you know the rear spring centers for an MK, maybe Challenger too, and for the MJ.
I believe I have read that the earlies, up to MJ had ~39" centers.
I need to know if the springs are further apart on the wider rear end as I am looking at bolting one in my L300.
I have a 4.875 9" center and axles from a delica and it would save me grinding all the brackets off and welding on pads.

Here's hoping, Regards, Al
Top
Posts: 36
Joined: Fri Nov 07, 2003 7:49 am
Location: canberra

Re: Triton rear ends SOLVED

Post by alanc »

Hi,
I include my answer just in case someone else is interested.
Looked around the car yards and got to measure a 2002 Triton across the rear springs, 995 mm, same as my 85 L300.
2009 was way wider, at least 50 mm.
So, I assume that 10/96 to 2003, MK, are bolt up to spring compatible with most early leaf spring chassis. Dunno about pinion angle yet.
They are 64 mm wider drum face to drum face and have larger brakes.

Cheers Al
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest