Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Any Outerlimits members who want to start downloading the F300 Factory Service Manual please PM me. This is the full manual covering the entire vehicle.
I have started uploading it to a site- I am not making the address known publicly due to bandwidth restrictions. Anyone I give the address to I ask to keep it private, or else the site will be taken off line. I am only able able upload the smaller sections at the moment, but in a week will be able to upload the remainder (hopefully....)
Hi Rick, I finally got around to doing it. Finding a decent free site to host it is a major PITA; I'm still investigating some others with larger bandwidths so I can post the link publicy.
Pity about the lack of interest so far- only two people!? I thought I'd be doing everyone a big favour and inundated with PMs.
(There are no strings attached people, it's entirely free- the same manual is being flogged on the internet on CD for $$$.....)
Would this be the workshop manual that covers maintenance, engine mechanicals, emmision control systems, EFI systems etc? If so this is or was available from WARFS website, if not put me down as I would like a copy.
Cheers
Jim
Welcome to those new guys who have just joined and PM'd me for the manual.
I'll give you the address details in another day or two- I just need to sort out with Dan if I'll be changing over to his site (due to limitations with the current host.)
With a big THANKS to Dan (icebreaker) - the full service manual should be online within the next 24hrs (providing my lame website skills don't let me down.)
The best part is the address will be posted publicly for everyone to download from.
Hi, I have just joined today ( Wed 28 April 2004). I purchased a Feroza (1996 Feroza 2 SX) 3 weeks ago and I am very interested in having a copy of the service manual.
Also if anyone else lives in Newcastle, Australia please drop me an e-mail to richardc06@hotmail.com Please put Feroza in the subject as I get a lot of junk mail.
Hope to hear from some of you out there.
Richard.
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
I'm just trying to download a couple of the smaller files to check- so far all's not looking good The Index is corrupted and so is another I just tried.
I'll place them all into a zip file and upload it all as one zip file. Ho hum, another couple of hours uploading........
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
I am just wonderif the 26 Meg file is the service manual for the F300 HD engine published in Feb 1989. Could someone please tell me ?
Just look at the front page and it says on there if it is.
The only difference I've heard of is someone said the diagnostic connector for the EFI was a different pin out with two extra pins. Mechanically the engines should be the same.
I found the starter motor on my '92 didn't match up with the 26mb manual- there are a couple of versions shown but mine was different again!
Finding a decent free site to host it is a major PITA; I'm still investigating some others with larger bandwidths so I can post the link publicy.
I thought I'd be doing everyone a big favour and inundated with PMs.
The Index is corrupted and so is another I just tried.
