Hi all.
Im from SA. Here where we know how to braai. Haha.
i have been reading a lot in the last few years about the paj mods and and...
A few things i need confidence on is all the in and outs of fitting 33 on my nj.
Will the factory lift and gq coils be enough to fit 33" ? I do have coil over shocks in front, and will also be fitting a ball joint flip with 25 mm spacers and high tensile steel bolts. Also will i be able to keep the stock
wheels with the 33x12.5x15. My reason is simple. I would like the ground clearance without moving centre of gravity to the top by means of the body lift?! If that makes sence.
Also how much of a change would i notice in low range.
Any and all inputs would be appreciated.
Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
33" and questions
Moderator: -Scott-
33" and questions
Only in a Paj.
1996 lbw 3.5 v6 Pajero
1996 lbw 3.5 v6 Pajero
Re: 33" and questions
Ok so i went ahead and fitted 33×12.5 × 15 Cooper stt on my standard wheels and all is fine, even without the gq coils. But i will be fitting them coils anyhow.
Only in a Paj.
1996 lbw 3.5 v6 Pajero
1996 lbw 3.5 v6 Pajero
Who is online
Users browsing this forum: No registered users and 0 guests