I have td 42 and can't get fuel to the injectors. fuel cut off solenoid works but is only a single wire ,the harness is 2.Previous owner had it bridged to the battery. I have even removed the plunger and it's bleed all the way to the pump but still won't squirt fuel.I bought not running so don't know it's history any thoughts please
And the pump turns when cranking
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TD42 injector pump issue
Re: TD42 injector pump issue
Fair dinkum this site has lost it's appeal
Re: TD42 injector pump issue
Have you looked at the sieve at the inlet to the pump? They get clogged with shit.
I've always pulled them out on every rig, undo the inlet to the pump, use an o-ring pick or something similar and pull it out. If it is clogged, whatever got through the filters will go through the injectors, unless it was run with no filters.
I've always pulled them out on every rig, undo the inlet to the pump, use an o-ring pick or something similar and pull it out. If it is clogged, whatever got through the filters will go through the injectors, unless it was run with no filters.
Re: TD42 injector pump issue
yep already removed,doing full rebuild so will end up with new pump anway
Who is online
Users browsing this forum: No registered users and 0 guests