Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Shock Tower Spacer

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Shock Tower Spacer

Post by defender kev »

Wheres the best place to get a set of spacers for my defender need about 1" prefer Melbourne.

Thanks Kev
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

easiest thing to do is get some made....
find a machine shop and get them to turn you some up...
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ring a local steel supplier and get him to cut some off some hollow bar?

Bazzle
Top
Posts: 160
Joined: Fri Nov 08, 2002 7:55 am
Location: melbourne

Post by madrangie »

if you want them email me as i have a set made already at a inch ... can do custom lengths too
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Do you do these for D2's also?
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 160
Joined: Fri Nov 08, 2002 7:55 am
Location: melbourne

Post by madrangie »

if the tower bolt up pattern is the same yes ... i have a mate with a 110 def extreme and the pattern is the same so i assume it will be the same with disco's..
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Ta MadRangie. I'll work out the PCD and see if they match. I think the D2 has different upper shock mounts to the D1, but the tower mount may be the same.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

now you will all be able to run 80 series cruiser shocks and pick up an inch or two travel, make sure your brake lines are long enough
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I currently run rear Patrol shocks up front which are about 10". They have the eye/eye mounts which I thought was different to most of the LR stuff. I'm thinking that with the shock tower spacers it may allow more compression travel with a longer shock.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

as i recently found out, one inch spacers using a threaded tube arangement has to be 30 mm to get at least 10-15mm of bolt intothe spacer. or you could grind about 7mm of the thread on the retaining ring.
imo with a good thread the bolt only needs to 10-12mm for full strength.
david.
ps also see if the spacers can be madefrom a material that can be tightened up by a tool eg-crowbar, so you can tighten them down with a spanner.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest