2 more inches up. Pretty good.
going to put 32x11.5x15 tires.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I've just finished my bodylift works.
Moderator: Tiny
I've just finished my bodylift works.
God is a DJ.
32 " tyres WILL fit, but your gearing will be shot to pieces !!
Boris, are you sure you want to loose that much gearing ?? You'll wear through your clutch twice as fast from 'riding' it to get over obstacles, increase your chance of damage to other things from having to hit the obstacles too fast ???
Jimmy - Offset refers to the 'backspacing' of where the mounts in the wheel actually are.
If you have an 8" wide rim, the mounts are usually between 3-4" from the front edge of the rim and that would leave 4-5" of 'backspacing' (measured from the back of the rim)
The only problem with getting a wider offset (say 4-5+" from the front lip of the rim) is that it puts more pressure on your wheel bearings, making them wear through quicker. It does give you a wider track on the ground, which is better for stability.
Like most things with 4WD's, it's a compromise
Boris, are you sure you want to loose that much gearing ?? You'll wear through your clutch twice as fast from 'riding' it to get over obstacles, increase your chance of damage to other things from having to hit the obstacles too fast ???
Jimmy - Offset refers to the 'backspacing' of where the mounts in the wheel actually are.
If you have an 8" wide rim, the mounts are usually between 3-4" from the front edge of the rim and that would leave 4-5" of 'backspacing' (measured from the back of the rim)
The only problem with getting a wider offset (say 4-5+" from the front lip of the rim) is that it puts more pressure on your wheel bearings, making them wear through quicker. It does give you a wider track on the ground, which is better for stability.
Like most things with 4WD's, it's a compromise
[color=orange] BESTY [/color]
GU4800
GU4800
Ferozius wrote:32 " tyres WILL fit, but your gearing will be shot to pieces !!
Boris, are you sure you want to loose that much gearing ?? You'll wear through your clutch twice as fast from 'riding' it to get over obstacles, increase your chance of damage to other things from having to hit the obstacles too fast ???
Depends on the 32" hey. A Simex etc will measure that if not larger but lots of other 32's will be genuine 31's at best.
Ferozius wrote:32 " tyres WILL fit, but your gearing will be shot to pieces !!
Boris, are you sure you want to loose that much gearing ?? You'll wear through your clutch twice as fast from 'riding' it to get over obstacles, increase your chance of damage to other things from having to hit the obstacles too fast ???
Jimmy - Offset refers to the 'backspacing' of where the mounts in the wheel actually are.
If you have an 8" wide rim, the mounts are usually between 3-4" from the front edge of the rim and that would leave 4-5" of 'backspacing' (measured from the back of the rim)
The only problem with getting a wider offset (say 4-5+" from the front lip of the rim) is that it puts more pressure on your wheel bearings, making them wear through quicker. It does give you a wider track on the ground, which is better for stability.
Like most things with 4WD's, it's a compromise
Will the gear problems be so huge? We have a vitara on 33" simex and it rides well.
God is a DJ.
Who is online
Users browsing this forum: No registered users and 0 guests