I busted the rear RHS axle today in my 80 today.
It had the hub stud holes bored out to accept the 100 series hub studs ( which are 10mm not 8 or 9)
Could I just get a 105 rear axle and slide it straight in without having to do the hub stud bore-out, like what I'd have to do If I get a stock 80 series one ? This would be much easier.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
105 rear axle into an 80 ?
Moderators: toaddog, Elmo, DUDELUX
Re: 105 rear axle into an 80 ?
No, It's got different splines you dickhead !
Re: 105 rear axle into an 80 ?
Hey! Who are you calling a dickhead! ?BJ73 wrote:No, It's got different splines you dickhead !
Flanges and hubs are different too.
Holes are spaced differently and axle flange is larger diameter
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Who is online
Users browsing this forum: No registered users and 1 guest