Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

shocks for gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

shocks for gq

Post by fatassgq »

Hey there all,
Well to cut a long story short I found out on the weekend (what I had suspected) that my rancho's are fucked! surprise (not!) The ride has definitely not been as good as it should.

I think at this stage cause I have the in cab kit I will leave the back ones on but will look for two for the front first.

Can anyone recommend a good shock for a heavy bitch of a gq. I was thinking of something at a reasonable price as $ are low at the moment.

Ome, procomp??? Never getting ranchos again thanks.
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Get long travel OME's... think bogged or bazzle was sayin something about them being excellent etc.

TOM
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

If you got the toughdog adjustibles are they able to be adjusted with your rancho incab kit.
Other than that the OME Long series are supposed to be good Rolly and Bazzle think there a good buy. Not suitable for lifts over 4" though (but not 100%) but they probably are the cheaper of the opions.
THOUGHT FOR THE DAY....
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Yup
I run the OME N19 L's on the front, N29 L's on the rear.
Done some challenging stuff on them. Ride corrugations well and follow ruts excellent.
If you need even longer fronts you can fit 80 series front and tower spacers.

Bazzle
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

go and eyeball the new tough dogs at opposite lock, they are adjustable also and by the looks of them they will integrate with the incab setup.
Built, not bought.
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

I'm running OME 80series in the front with tower spacers and have found them excelent. You can get them in soft of hard depending on the style of driving you do. I had the soft setting but have just put the harder ones in as I like to poke along without swaybars fitted. Excelent value for your $
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

Yep definitely will have to look into the tough dog ones as the incab kit is great and seeing as though I already have it with holes cut in the dash pod it would be good to keep it.

The tough dogs where my main interest as they seem long and big cell to cope with weight and coil springs.


Cheers
Brian
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

OME N33L works well on the front, they are a comp shock for an XJ Cherokee, just shy of 13" travel. you will have to play around with the mounts though.
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Post by MYTTUF »

I use and recommend Koni on my 80 Series. We also had them on the GQ Shorty comp truck a few seasons ago without fail, even if the truck was only on the road a few months, but the same shockers have been put on a GQ wagon and are still fautless. They may be dearer but I reckon they're worth it.
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Re: shocks for gq

Post by 5upaMav »

fatassgq wrote: Well to cut a long story short I found out on the weekend (what I had suspected) that my rancho's are *****! surprise (not!) The ride has definitely not been as good as it should.


So how did they fail? Are they leaking or something? How much of a hard time have they had to date?

I've got a set and considering the absolute bagging they cop around the traps, I'm getting a bit paranoid. I only do about 5000km a year in my truck (weekender only), but am planning on going to the Cape in the near future. Better take a spare set!
Posts: 199
Joined: Mon Jan 05, 2004 11:18 am
Location: Snowy Mountains

Re: shocks for gq

Post by Butt Craic »

5upaMav wrote:am planning on going to the Cape in the near future.


I've got Ranchos in my GU ute at the moment and they are the first thing that I'd rip out if I was doing a long trip over the corrugations. IMO they are not up to the weight of a GQ/GU in the front.

I've got about 7" of spring lift and 2" tower spacers and am currently looking at options that will give me enough travel.

For my 4" springs I've got a set of Konis and if the cost of getting some custom Konis made for the taller kit wasn't such a killer I'd definitely go down the same route again.

I'm leaning towards an OME shock . . . just a matter of sorting out the right model.
I'm not very good looking, so I guess I better be useful . . .
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

i have the RS9000 in my GQ LWB, and have had oil leaking from the front left one i think, they have been in there a bit over 12months, i wouldnt say they cop a complete bvashing, but they do get worked a bit,

i just cant afford to replace them, so at the moment, they are "Rancho Spring Retainers" Limited Edition :)
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

Im running the tough dog adjustables, and find them to be excellent. Ive got the rear sway bar off and am soon to take off the front aswell. They re just ssoooo bloody expensive , hope they last !!. shane......
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

did you fit the TOugh Dog adjustables your self? if so, how did you find fitting them in the front as i believe they sit very close to the hold for the shock, i believe the rub a little if you dont make the opening larger?
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

yeah they rub a little , nothing major though. Might think about opening the towers up a bit
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

bagsy wrote:yeah they rub a little , nothing major though. Might think about opening the towers up a bit


it wouldnt hurt
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Re: shocks for gq

Post by Area54 »

5upaMav wrote:
fatassgq wrote: Well to cut a long story short I found out on the weekend (what I had suspected) that my rancho's are *****! surprise (not!) The ride has definitely not been as good as it should.


So how did they fail? Are they leaking or something? How much of a hard time have they had to date?

I've got a set and considering the absolute bagging they cop around the traps, I'm getting a bit paranoid. I only do about 5000km a year in my truck (weekender only), but am planning on going to the Cape in the near future. Better take a spare set!



I would not get paranoid about it, Ranchos do come in a variety of ratings, for light and heavy vehicles. Some of the longer travel models are for the lighter vehicles and do not have the beef in the valving to stand up to a heavyweight rig with a lot of mods/accessories. I have a set on my wagon (correct valving for the vehicle), had them on for four years and they still work as good as the day I bought them.

A lot of people can sometimes unknowingly fit the incorrect valved shock for their rig, if they buy them from a supplier who asks no questions or offers no advice (or honestly doesn't know). This premature failure can give any product a bad name, quite often not always due to product failure, but due to incorrect product application.
Built, not bought.
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

As Area54 has said above I did not put these shocks on the truck so yeah they could have been an unsuitably valved.

To be honest I have not had good experiences with the rancho's though.

I took the shock off the gq because it lost the top nut then bent the top pin then the bottom pin :bad-words: . Once I had it out it was obvious that the shock would be doing sfa as it had points within the stroke that had no resistance at all. Sloppy rancho!!!

With a lot of weight and higher speeds (road etc) I think there are better suited shocks around, especially for a coil sprung car.
Even auto aliance recommends the bigger tough dogs over the rancho's for a heavy truck like mine (winch side bars two batteries diesel etc.) Maybe cause they are more expensive also!!! lol

A shock does so much more work in a coil sprung car than it does in a leaf sprung car it is not funny. Best to get the most suited I think. JMO but in my case now, rancho are not the best suited!!!!

Brian
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

Thanks heaps for the comments AREA54 and FATASSGQ. That makes sense . . . I've got the right Ranchos for my (modest) 2-inch lift and have a petty with no winch or second battery. The guy I got them off bought a complete spare set to go to the Cape with and never needed them (that says something I guess!), so I got them still in the box unused. He had a petrol GQ coil-cab.

I have actually found them to be great and really like the adjustability . . . and considering I got all four brand-new and a set of 2-inch-lift springs for six hunge, I figured it was worth a try.
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

hey all.. i have fitted tuff dog ralphs.. those big suckers.. to my 91 mav swb.. i have what is supposed to be 4 inch springs from kings but due to the fact i have a petrol swb they are actually about 5 1/2...i have dual lpg tanks in the back (200l all up) and and a arb deluxe bar and warn 9000pounder in the front. the shocks are awsum..i run around with no sway bars and i swear it handles better than standard. u have to do a bit of grinding to make them fit.. the rear passenger side bump stop plate on the bottom and trim a bit of the reinforcing strip along the front shock towers.. the valving is a bit firm, but simon at tuff dog blacktown will revalve for no charge.. i highly recommend them to any one that is after shocks for their fourby.. cheers
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

my setup is basically rancho rear and koni front - Will be replacin the rears wtih a different setup eventually.

Guess best thing bout konis - rebuildable - so its a worthwhile investment rather than spendin on a pair of shocks which arent goin to last.

TOM
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests