Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disc brakes for fj40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 43
Joined: Thu Apr 29, 2004 9:39 pm
Location: Slacks Creek (Brisbane)

Disc brakes for fj40

Post by Raymond Spackman »

Will swivel hubs off fj60 fit onto a 72 fj40 front housing? I have disc & calipers already. OR do i need a later model housing. I also have 80 model axels there if I need them.. Any help with sorting out what I need would be greatly apreciated. Thanks
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

brakes

Post by DIRTY ROCK STAR »

mate im not sure but you might run into trouble with your axels.

are yours coarse or fine spliners etc? I got in all sorts because my diff centre was from horse and cart days. meant almost a whole new front end...

if i could warp back to last NOV i would buy 60 series diffs and swap them under my 40, instead of spending a fortune stuffing around with dodgy disc brakes i bought 2nd hand which were duds.
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

The 72 front housing will work with the swivel hubs off a 60 series. You have to grind the housing a little to fit the cv joint. Use the inner axles from the 40, they should fit into the 60 cv's.

Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 120 guests