Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
raditor/ p/steer problems
Moderator: Micka
raditor/ p/steer problems
were buildin a series 3 swb on a ranger chassie runnin a holden v6 and a cruiser 5 speed , problem is where the power steer sit's on the rail is where the radiator has to sit . has any bodie done this conversion before ? have tryed other size radiators .while i think of it ,whats the go with the 2 brake lines comin out off the calapers ?can this b changed? thanks craig
haven't done this....but know many who have with different conversions.
Most cut out the front crossmember and move it forward about 6inches and replace it. Move front grill forward and extend exising bonnet or use either a Defender 110 or Stage 1 V8 bonnet and grill.
This is just one way to do it (but i was pretty sure the radiators weren't sitting on the crossmember, they are just bolted in to the exisit points off body????...i thought mine was
)
Good luck and post up on the buildup!!!
Dave
Most cut out the front crossmember and move it forward about 6inches and replace it. Move front grill forward and extend exising bonnet or use either a Defender 110 or Stage 1 V8 bonnet and grill.
This is just one way to do it (but i was pretty sure the radiators weren't sitting on the crossmember, they are just bolted in to the exisit points off body????...i thought mine was
)
Good luck and post up on the buildup!!!
Dave
Land Rover Discovery - GQ conversion underway
any thing on brakeswill be a PITA...almost nothing you can do that i know of, without making some form of trick hub spacer/adapter to go from a 5 bolt hub to 6 bolt...
There are kits available but $$$$$$$, almost worth more than the car!
Prolly best thing to do would be to swap in some mq/mk and make new mounting plates..
Read up on pirate, i think they have a bit of this stuff on there at the moment!
Dave
There are kits available but $$$$$$$, almost worth more than the car!
Prolly best thing to do would be to swap in some mq/mk and make new mounting plates..
Read up on pirate, i think they have a bit of this stuff on there at the moment!
Dave
Land Rover Discovery - GQ conversion underway
Who is online
Users browsing this forum: No registered users and 1 guest