The standard clutch in the L28 MQ got fried at LCMP last weekend.
Can anyone recommend a heavy duty clutch, how much it might cost and where to get it from?
It will be used as a daily driver, but it is going to be doing Short Course racing and winch challenge races.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Heavy Duty clutch for L28 MQ
God of Magnificant Ideas!
Fit a diesel clutch and pressure plate, from the same series ( MQ-MK)
Should line straight up with no mods needed
Alternativly look into a 99mod TDI clutch pak , but ya flywheel will need mods ( redrilling ), belhousing may need a slight grind aswell to allow the larger pressureplate room.
Kingy
Should line straight up with no mods needed
Alternativly look into a 99mod TDI clutch pak , but ya flywheel will need mods ( redrilling ), belhousing may need a slight grind aswell to allow the larger pressureplate room.
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Who is online
Users browsing this forum: No registered users and 0 guests