Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ revs at 100km

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 53
Joined: Sat Jul 19, 2003 9:53 am
Location: QLD

MQ revs at 100km

Post by drive it »

Does any one know roughly how many revs a MQ patrol does at 100km with 32's on. all i know is it sounds like alot.
GUTS ARE GOOD, BALLS ARE BETTER
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

wats the motor? desiel or petrol???????/

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

revs

Post by DR Frankenstine »

If its a std sd33 or an l28 petrol in front of a 4 spd it will be doing about 3000 revs at 100k's and it will have 4.625 ratio's. Tyre size won't make any difference to speedo v revs unless you change diff ratio's or spedo gears the later not being available for Mq's. 33's though won't put you're speedo out that much anyway
Top
Posts: 53
Joined: Sat Jul 19, 2003 9:53 am
Location: QLD

Post by drive it »

it's a SD33, 4 spd , 81 model

what do they redline at?

not that I think it would be able to :?
GUTS ARE GOOD, BALLS ARE BETTER
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

About 100kph at 3k revs.
redline (governor) at about 4k

Bazzle
Top
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Contact:
Contact Big Red Toy

Post by Big Red Toy »

Whats a redline??? :armsup: :D :armsup:
REV IT TILL SHE BLOWS!!!!
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I had my L28 out to about 6500rpm, or it might have been more.... can't kill those engines :D
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

everyone has told me i reved my V8 over the line and thats y she blew.
I never took it above 4K so i think my Rebuilder is just in need of a size 14 up the butt!!!!! :D

But ive experianced the blow now so trust me unless u have $1500 u want to blow, listen to motor!!

cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

revs

Post by DR Frankenstine »

sd33 is rev limited to 3500 revs
sd33t (turbo) 4000 revs
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: revs

Post by Screwy »

DR Frankenstine wrote:sd33 is rev limited to 3500 revs
sd33t (turbo) 4000 revs


Mine definatly wasnt rev limited to 3,500 K. NO WAY!!!

i was able to sit at 160 km / hour and not over heat for 10 mins and she was still able to accelerate ( i could hear the motor getting loader ) and the needle was pinging off the speedo. :armsup:

SHE MOVED harder than 3500 could take her.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 123 guests