Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mq diff ratios

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

mq diff ratios

Post by berazafi »

not sure what ratios a turbo deisel mq patrol has to start with if i go to 35inch tyres what is required to be done ratio wise???, yes its a spin off from another post. Any idea what the cheapest way to do this is and how much
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

if u have 4.625 ratios u will drive 35's easy. most MQ's came out with this ratio.

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

Post by beefie »

should be 4.3 but it will tell you on the compliance plate.
wich is on right hand inner guard.

HG43 4.3

HG46 4.6
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

diff ratios

Post by DR Frankenstine »

The diffs in mine are 4.3's and turn 35's easy. though i am running 11lb of boost now and 3" exhaust. I would like to change to 4.6 ratio though just to get some more poke and get my speedo back to somewhere near normal.
Top
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

cheers guys thanks for the replys, i am running 33s at the moment, any idea how many revs it will drop approx with 35 at 100ks, or should i say how much speed will it gain in 1st low. I checked the compliance plate and it doesnt say anything only the standard shit rules no, type seating cap no 43 or 46 or anything similar. also i noticed a crack on the left hand side near the radiator have just do 2inch boody lift could this cause it
Top
Posts: 85
Joined: Thu Jan 22, 2004 6:19 pm
Location: eastern melbourne

Post by TwistedMQ »

Did nissan use the same diff ratios with the four and five speed gear boxes.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest