anyone got pics/specs of lower rear spring retainers on a Rover that work well and last when using 12+" stroke shocks and ~18" free 180-220lb springs, 32-35" tyre & steel rim?
Im being specific because I think a retainer that works for 10" free, 330lb springs and 44" tyres may be overkill for what I want, you get the idea.
Cheers
Daryl
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spring retainers
Moderator: Micka
pics
TuffRR,
Got any pics of your shock mounting arrangement?
What shocks and type of end bushings?
Mine (89RR) hasnt got any retainers, what do stock ones look like?
Cheers
Daryl
Got any pics of your shock mounting arrangement?
What shocks and type of end bushings?
Mine (89RR) hasnt got any retainers, what do stock ones look like?
Cheers
Daryl
Retainers
I Run Rangie Spares Lower Retainers that allow the spring to to twist. They are about 40 mm high and have mountes a cone shape 80 Series Toyota Bumpstop inside at the top to guide the spring back into location.
Running 18.5 free height 220lb springs and GQ Rear Shocks that are eye to eye and made a bracket to suit the pin mount, works well.
Running 18.5 free height 220lb springs and GQ Rear Shocks that are eye to eye and made a bracket to suit the pin mount, works well.
pics
Locky,
I need pics!!!!!
Im running 80 series bumpstops but cant concieve a neat way to retain the top of the spring.
For the lower I was going to copy the Expedition Exchange design but was looking for other sources of inspiration, haven't seen the rangie spares version, what do they look like?
Cheers
Daryl
I need pics!!!!!
Im running 80 series bumpstops but cant concieve a neat way to retain the top of the spring.
For the lower I was going to copy the Expedition Exchange design but was looking for other sources of inspiration, haven't seen the rangie spares version, what do they look like?
Cheers
Daryl
On my rear spring Im using 40mm x 5mm clamp plates top and bottom in a similar way to the factory lower mount (I bent this one and just made it bigger)
On the front Im using a piece of 25mm x 5mm steel bent into a very tight hook that hooks over the bottom winding of the spring. The upper one is bolted in and the lower one is welded in. To change the springs I have to cut the lower one off but its very easy to get to and I just weld it back on. From now on Im just going to use the welded hooks all round, its very easy to do and they don fall off.
Sam
On the front Im using a piece of 25mm x 5mm steel bent into a very tight hook that hooks over the bottom winding of the spring. The upper one is bolted in and the lower one is welded in. To change the springs I have to cut the lower one off but its very easy to get to and I just weld it back on. From now on Im just going to use the welded hooks all round, its very easy to do and they don fall off.
Sam
Adam wrote:does rangie spares have a website or a catalog i could look at those in? they sound awesome and just what im looking for...
Adam http://www.4wdworld.com.au/outlets/rangie/rangie.htm
John
You can go to http://www.expeditionexchange.com/retai ... 833340.jpg
I got them, but Have not yet installed them, finish is GREAT, and size is great.
I got them, but Have not yet installed them, finish is GREAT, and size is great.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
spring height
18.5" free 220lb/in in rear = 400mm loaded height / no bumper, spare etc
18" free 180lb/in in front = 300mm loaded, rover eng, arb bar, xd 9000
vehicle sits ~50mm rear high unloaded
need DC front shaft at this height, rear seems OK. Haven't driven much with this set up so time will tell, dont know about balance front to back yet really either..
dont ask me what this equates to in terms of total lift from stock cause I really have no idea, at a guess its about 100mm maybe more....
Cheers
Daryl
18" free 180lb/in in front = 300mm loaded, rover eng, arb bar, xd 9000
vehicle sits ~50mm rear high unloaded
need DC front shaft at this height, rear seems OK. Haven't driven much with this set up so time will tell, dont know about balance front to back yet really either..
dont ask me what this equates to in terms of total lift from stock cause I really have no idea, at a guess its about 100mm maybe more....
Cheers
Daryl
I made my own spring retainers for the rear (upper and lower), and have made sets for a friend in Perth that are on their way there. I sent him 4 sets, all already spoken for.
I run 3.5" springs, and 1.5" aluminum spacers (that I made) on my 1988 Classic. I run 34" swampers, and 10" shocks. The lower retainers are 1/4" steel flat plate, and the top is 3/16" flat plate. I use grade 8 hardware, and have run these on my truck for two years now, with NO problems. The first picture is a beefier version of the lower retainer, and the other two pics are the top retainer.
-Kevin Bowers, Flagstaff, AZ U.S.A.
KDBLMB@msn.com
I run 3.5" springs, and 1.5" aluminum spacers (that I made) on my 1988 Classic. I run 34" swampers, and 10" shocks. The lower retainers are 1/4" steel flat plate, and the top is 3/16" flat plate. I use grade 8 hardware, and have run these on my truck for two years now, with NO problems. The first picture is a beefier version of the lower retainer, and the other two pics are the top retainer.
-Kevin Bowers, Flagstaff, AZ U.S.A.
KDBLMB@msn.com
Who is online
Users browsing this forum: No registered users and 41 guests