Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Who does wheel offset changes?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4
Joined: Thu May 13, 2004 11:23 am
Location: Melbourne

Who does wheel offset changes?

Post by BJmiddy »

Bought some tyres on Prado steel 16x7s- rubs (big time) on the 73s left tierod. Crusier 16x8s = $125 ea. Greg mentioned in the thread below, that resetting the off set can be done for about $50 per rim.


http://www.outerlimits4x4.com/PHP_Modul ... hp?t=10567


Can anybody supply a name/location to go with this price?

Thanks

Nat
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

i mentioned what where?

hehe

hang on - i'll search for it.
DMA Founding Member #1 - Now Retired
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Cruise here:

http://www.outerlimits4x4.com/PHP_Modul ... tern+wheel

There are 3 places mentioned

Neway Wheels
Eastern Wheel Works
and another place i think.

Cheers
DMA Founding Member #1 - Now Retired
Top
Posts: 4
Joined: Thu May 13, 2004 11:23 am
Location: Melbourne

Post by BJmiddy »

Damn that was a quick reply :D !

Thanks heaps!
[size=134][color=yellow][b]Go the mighty muddy middy!![/b][/color][/size]
Top
Posts: 151
Joined: Thu Dec 04, 2003 6:37 pm
Location: Springwood NSW

Post by Eddywelder »

anyone in sydney do the same?
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

and ajax wheelworks,
but i recomend eastern, they have done 4wd and road race wheels for me.
david
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

any engineering shop should be able to do it, it can only be done to stitch welded wheels like ROH, i dont think that it could be done to landcruiser steels as they are pressed and blind welded.


NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests