Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spring over conversion

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Spring over conversion

Post by huntn »

Im half way through my conversion and am just wondering what parts i need to buy to get my steering right? and will a 1.3 turn 35s? if not what V8 motor conversion fits in a sierra?
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

Big block should go in easy
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

have a search mate - a 1.3 will turn 44's if you have the gearing to do it...

The issue will be how much wheel speed you can produce from that gearing though.
DMA Founding Member #1 - Now Retired
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: Spring over conversion

Post by bigsteve »

huntn wrote:Im half way through



Just enough time to turn back :finger:
yeshemesh
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: Spring over conversion

Post by greg »

bigsteve wrote:
huntn wrote:Im half way through

Just enough time to turn back :finger:


:rofl:



Huntn, where abouts in melbourne are you? I'd be keen to see this tray back sierra springover/springunder of yours.
DMA Founding Member #1 - Now Retired
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Spring over conversion

Post by Guy »

huntn wrote:Im half way through my conversion and am just wondering what parts i need to buy to get my steering right? and will a 1.3 turn 35s? if not what V8 motor conversion fits in a sierra?


what v8 will fit .. that depends on the amount of work your willing to do and if you ever want to register the vehicle for road use.

If you pick a motor it has probarbly been installed in a Zuk everything from a 660cc turbo 3cyl to 5.7V8's I have even heard of a strait 6 red motor being shoe horned in ..

I used to run 35's on my Zuk with a warmed up 8v 1.6 it is a pretty easy install, a better motor but more complex install i sthe 16v 1.6 vitara motor, with some decent gearing say a 6:1 rockehopper and some 4.8 or 5.1 diffs, should allow good road speeds with great crawlability and excellent off camber manners ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

i ya really wanna go a V8 then go a rover 3.5ltr as they are all alloy and are as cheap as
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

Hey grey zook, do u know if any one has done one? Would it fit? anyone got the dimension of that motor and gearbox?
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Grey Zook / Huntn,

What you are proposing with the Rover v8 sounds very similar to what NAM has tried to do in the past. It could be worthwhile finding out a bit about it from him. As far as i am aware - this combination was never going to be made street legal (if that is a consideration for you).
DMA Founding Member #1 - Now Retired
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: Spring over conversion

Post by droopypete »

love_mud wrote:a better motor but more complex install i sthe 16v 1.6 vitara motor, ..


Even better again would be a twin cam Vitara 4cyl.
Peter.
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: Spring over conversion

Post by greg »

droopypete wrote:
love_mud wrote:a better motor but more complex install i sthe 16v 1.6 vitara motor, ..


Even better again would be a twin cam Vitara 4cyl.
Peter.


I think these engines are only any good when they are in a car pete. :)
DMA Founding Member #1 - Now Retired
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: Spring over conversion

Post by droopypete »

greg wrote:
droopypete wrote:
love_mud wrote:a better motor but more complex install i sthe 16v 1.6 vitara motor, ..


Even better again would be a twin cam Vitara 4cyl.
Peter.


I think these engines are only any good when they are in a car pete. :)


looks prety good on the engine stand :lol:
Peter.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest