The scenario is that I'm considering putting a Hilux diff (complete 3rd) into my rear Disco axle housing.
Is there a Toyota ring and pinion that fits the rear Hilux diff in the ratio of 4.1? I know the LC80 has a 4.1 in the front that will fit, but from what I understand the cut isn't good for its use in the rear diff. As far as I'm aware the Hilux didn't come with 4.1's, though I'm happy to be corrected.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.1 Hilux R&P ???
Moderators: toaddog, Elmo, DUDELUX
4.1 Hilux R&P ???
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
3ltr auto surfs (93 - 96) had the 4.1. I swapped mine out for 4.3's after lunching the IFS diff and could not get a replacement. Don't think any early 2.4 Surfs had them. They are all 4.3 4.5 4.8.
I might still have the rear 8" R&P kickin around some where.
Alec
I might still have the rear 8" R&P kickin around some where.
Alec
GO the 80...The mods have started :-)
guys
my old lux (80 single cab 18R) has 4.1:1 ratios in it. I've wrecked another two since that for parts and they had the same. keep getting told that they are rare as rocking horse poo, but every lux i've found has em.
cheers
matt.
my old lux (80 single cab 18R) has 4.1:1 ratios in it. I've wrecked another two since that for parts and they had the same. keep getting told that they are rare as rocking horse poo, but every lux i've found has em.
cheers
matt.
Administrator
Perth4x4.net.
there is no replacement for displacement.
Perth4x4.net.
there is no replacement for displacement.
tufflux380 wrote:guys
my old lux (80 single cab 18R) has 4.1:1 ratios in it. I've wrecked another two since that for parts and they had the same. keep getting told that they are rare as rocking horse poo, but every lux i've found has em.
cheers
matt.
they shouldnt, but it is possible as someone may have swapped them out for better highway driving in favour of the 4.88.
NICK
TECH SCREW GURU
Who is online
Users browsing this forum: No registered users and 4 guests