Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

car warranty

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

car warranty

Post by mav »

i've got a 4 month old mazda 323 sp20 with 14000 kms, it has dropped some screws out of the butterflys in the manifold and some of the screws went into one cyl marking the piston, now here is the problem the dealership are recommending to mazda to just replace the piston i'm not happy with this, has any one got any ideas on how to get them to replace the whole motor. and yes this is the dealer i bought the car new from .
see ya mav
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

i used to work for mazda and they were always tightass on there warranty. basically you are going to have to yell and scream alot to get anew motor.


YOU WILL GET IT!!



NICK
TECH SCREW GURU
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

Post by mav »

who is the best person to yell and scream at the dealer or mazda australia ??????????????



NICK wrote:i used to work for mazda and they were always tightass on there warranty. basically you are going to have to yell and scream alot to get anew motor.


YOU WILL GET IT!!



NICK
see ya mav
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Both. If one dosn't listen then the other will.

This dosn't sound like our local Mazda dealer!!!!! :P :P
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

One question I would be asking is, what other damage is there?
For a steel screw to damage a piston, it must have impacted on someting else, like piston to bore, piston to valve, piston to head, it must have been sandwiched between the piston and something.
And when communicating with either the dealer or Mazda Aust, make sure it is all on paper, (try and get email addys), keep a diary of times dates and names, and stay calm when talking to them, even when you want to jump down the phone and rip their bollocks off.
Check pamphlets and Mazda web sites regarding where Mazda make their engines (hi tech, state of the art, automated engine plants) and see if your engine will be rebuilt in the same environment, not some greasy wooden work bench at the back of the workshop with the aprentice doing most of the work, as build quality and Mazda's legendry reliability were reasons you bought a Mazda over a Kia in the first place, good luck and give em shit :lol:
Peter.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Put it all into a letter and give the dealer principal (ie guy who owns the dealership you bought from) the initial copy and give him a date to reply by. Then if you don't get satisfaction write to Mazda Australia (there should be an address in the owner's manual somewhere) and do the same with them.

If that doesn't help then get in contact with the Office of Small Business Claims (ie Consumer Affairs) and they'll want you to put everything down on paper and send it in to them. Don't forget to include what outcome you want. They then make calls on your behalf and put the pressure on. ;)

Make sure you keep a good record of who you've spoken to, what they said and when they said it.

Goodluck. This sort of procedure has worked for me in the past.
David
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

droopypete wrote:One question I would be asking is, what other damage is there?
For a steel screw to damage a piston, it must have impacted on someting else, like piston to bore, piston to valve, piston to head, it must have been sandwiched between the piston and something.
And when communicating with either the dealer or Mazda Aust, make sure it is all on paper, (try and get email addys), keep a diary of times dates and names, and stay calm when talking to them, even when you want to jump down the phone and rip their bollocks off.
Check pamphlets and Mazda web sites regarding where Mazda make their engines (hi tech, state of the art, automated engine plants) and see if your engine will be rebuilt in the same environment, not some greasy wooden work bench at the back of the workshop with the aprentice doing most of the work, as build quality and Mazda's legendry reliability were reasons you bought a Mazda over a Kia in the first place, good luck and give em shit :lol:
Peter.


couldn't have put it any better myself....

It will be a fair fight but dont give up, they do after all have a reputation to uphold.

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

@*#@

Post by mav »

the dealership is now suggesting to mazda aust. that they replace the no. 1 conrod, all pistons/rings/big end bearings and the head, still no luck with just a new motor . and dazz not naming any names but i did by local.


DAZZ wrote:Both. If one dosn't listen then the other will.

This dosn't sound like our local Mazda dealer!!!!! :P :P
see ya mav
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests