is there a quick and painless way to get these in/out?
Looks like you need arms of a newborn to get inside the door....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 series window regulator removal/installation
Moderators: toaddog, Elmo, DUDELUX
40 series window regulator removal/installation
now in Perth
remove winder, remove panel from door.
If u wind the window right up. Then undo the 4 bolts around the winder followed by the 2 bolts towards the opening edge of the door. now u need to unbolt the mechanism from the bottom of the glass.
Push the winder into the door and slowly push the glass down until u see the bolts in the small holes in the door panel, undo bolts. winder should now fall of bottom of glass. lift out from bottom of door
Hope u can understand my explanation.
If u wind the window right up. Then undo the 4 bolts around the winder followed by the 2 bolts towards the opening edge of the door. now u need to unbolt the mechanism from the bottom of the glass.
Push the winder into the door and slowly push the glass down until u see the bolts in the small holes in the door panel, undo bolts. winder should now fall of bottom of glass. lift out from bottom of door
Hope u can understand my explanation.
thats exactly what i was looking at!! Who is online
Users browsing this forum: No registered users and 10 guests