Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Attention Ado

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Attention Ado

Post by Ian Sharpe »

Ado,

I have swithced a ground wire to the solenoid wire as you suggested.

It works fine (tested) except that my front light indicators on the dash dont go out , the best they do is flash.

You mentioned that yours go out when you ground the wire, well mine dont unless I have grounded the wrong one. grounded the yellow/blue wire that goes to the yellow marked solenoid. Thats the one isnt it.

anyway I guess I could always put a relay in the circuit to the dash lights.

BTW I used my hazard light switch for the switching that way no foreign switches.

cheers
I tried to call you but couldnt get thru.
Top
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

Post by Adomw »

Ian,

I'm glad that you were able to get the mod done, regards the lights - mine flashed as well but as soon as i moved/ drove the vehicle they went out.

Curious how yours doesn't??

My phone had some trouble over the weekend as the rough weather took out some mobile phone cells.

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 13 guests