Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

changing all the oils in my mav

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

changing all the oils in my mav

Post by marin »

well, i think i am gona change all the oils in my mav, they being front open diff, rear factory locker diff, manual tranmission, transfer case, and engine oil (i think thats all). What oils do people recomend for these purposes. It is an 89 model.
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

Petrol or Diesel?

Also have alook at what the factory specifies.
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

its petrol on gas. I have the factory manuals, but i was wondering what other people use and have found to be good, apart from the factory spec 1's. Also, factory spec just specifies what grade of oil, not what brands.
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

:D
Last edited by hottiemonster on Mon May 17, 2004 6:32 am, edited 1 time in total.
Gq ute new built
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

:D
Last edited by hottiemonster on Mon May 17, 2004 6:32 am, edited 2 times in total.
Gq ute new built
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

anyway, back on topic.

so what do people recomend?
Gq ute new built
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

hottiemonster wrote:
marin wrote:its petrol on gas. I have the factory manuals, but i was wondering what other people use and have found to be good, apart from the factory spec 1's. Also, factory spec just specifies what grade of oil, not what brands.


just for ben, i have a bigger lift, bigger tyres, arb locker & snorkel :finger: :D


man, you really suck! :roll:
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

hottiemonster wrote:
marin wrote:Rum injected, and just for Pete, I have factory diff lock and 4.1's standard from factory!!!!! .


but my arb locker and 3.9s go further (if you know what i mean, ben ;) ) :finger: :rofl: :finger:


must be fagosexual flirting. keep it to pms. :finger:
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

hottiemonster wrote:just for ben, i have a bigger lift, bigger tyres, arb locker & snorkel :finger: :D



yeah, maybe, but at least he is doing the work on his truck himself. :roll:
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

We use penrite in all our fleet, it's a premium oil at a premium price. Some might say it's overpriced, but if it works better than the cheapies I'm happy. Some of the grades might not be exact, but the specs fall somewhere in the middle, and being in QLD temp differences aren't as high in the southern states - so no need for a summer oil and a winter oil etc.
Built, not bought.
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

Ended up using castrol, being what the computer at repco has listed as the right oil, LSX 90 for the diffs and VMX 80 for the box and transfer. $120 of oil later..........
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Posts: 159
Joined: Tue Apr 27, 2004 12:15 pm
Location: WA

Post by GQAndrew »

marin wrote:Ended up using castrol, being what the computer at repco has listed as the right oil, LSX 90 for the diffs and VMX 80 for the box and transfer. $120 of oil later..........


I used the VMX 80 for the gearbox and noticed a huge improvement. Used to have probs changing to 2nd when cold, no longer a problem. Not sure when the oil was last changed before that though, looked pretty nasty!!

Also, the oil recommendations can be found on the Castrol, Penrite, Valvoline and Shell websites, although make sure you check with a couple of different ones as they can have some conflicting types regarding Transfer and Diffs
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

GQAndrew wrote:
marin wrote:Ended up using castrol, being what the computer at repco has listed as the right oil, LSX 90 for the diffs and VMX 80 for the box and transfer. $120 of oil later..........


I used the VMX 80 for the gearbox and noticed a huge improvement. Used to have probs changing to 2nd when cold, no longer a problem. Not sure when the oil was last changed before that though, looked pretty nasty!!

Also, the oil recommendations can be found on the Castrol, Penrite, Valvoline and Shell websites, although make sure you check with a couple of different ones as they can have some conflicting types regarding Transfer and Diffs


i have problem changing to second when cold also

might give this oil a crack
Gq ute new built
Posts: 159
Joined: Tue Apr 27, 2004 12:15 pm
Location: WA

Post by GQAndrew »

hottiemonster wrote:i have problem changing to second when cold also
might give this oil a crack


Definately worked for me, instant improvement :)

Maybe it was just needed a change, but it does state on the oil that it is ideal for older cars with gear change difficulty, especially in cold. Give it a try and see ;)
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

GQAndrew wrote:
hottiemonster wrote:i have problem changing to second when cold also
might give this oil a crack


Definately worked for me, instant improvement :)

Maybe it was just needed a change, but it does state on the oil that it is ideal for older cars with gear change difficulty, especially in cold. Give it a try and see ;)


yeah i will do.
Gq ute new built
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

transfer oil

Post by mav »

what about transfer oil, i've heard that late model gq's run tranny fluid in the transfer i've always run gear oil what is the difference between early and late model transfers????
see ya mav
Posts: 159
Joined: Tue Apr 27, 2004 12:15 pm
Location: WA

Re: transfer oil

Post by GQAndrew »

mav wrote:what about transfer oil, i've heard that late model gq's run tranny fluid in the transfer i've always run gear oil what is the difference between early and late model transfers????


Late model, which I believe is the series 2, 92 onwards. Have a Chain Driven Transfer Case, which takes Auto Tranny Fluid. I have Dexron 3 in mine, most oil recomendations recognise this, some dont and suggest gear oil. Nissan recomend Matic-D, which is their version of Auto Tranny Fluid, which costs about double that of Dexron :roll:
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

I have a 92 model patrol but how do you tell wether you have a chain or gear driven transfer? Is there some marking or something.

Chain driven sounds gay! Do they have problems in this area???


Forgive my virgin state to nissan internals


Brian
Posts: 159
Joined: Tue Apr 27, 2004 12:15 pm
Location: WA

Post by GQAndrew »

fatassgq wrote:I have a 92 model patrol but how do you tell wether you have a chain or gear driven transfer? Is there some marking or something.

Chain driven sounds gay! Do they have problems in this area???

Forgive my virgin state to nissan internals

Brian


Not sure how you tell, never had a look at a pre 92 one. If it is a Series 2 then I believe it will have the Chain Driven Case. I looked through the service records I got with the car and it had had the chain in the transfer case replaced.
Hopefully some of the experts will come along and give more info
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

yeah, it will be chain driven. the chain is massive, they don't fawk up ever.
the only problem with it is that you can't get a rear didconnect going because the front output is the last process in the case.
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

????

Post by mav »

i have a transfer i'm going to fit but don't know if it is a early or late model i was understanding that they all were chain driven, ages ago i put some transfer gears in a mates tranfer and it had the chain (i think it was early model '88).
see ya mav
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Re: ????

Post by MKPatrolGuy »

mav wrote:i have a transfer i'm going to fit but don't know if it is a early or late model i was understanding that they all were chain driven, ages ago i put some transfer gears in a mates tranfer and it had the chain (i think it was early model '88).


I thought they were all chain drive too...
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests