Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pajero Fuel Economy - Will Gas Conversion Help?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2
Joined: Tue May 18, 2004 9:19 pm

Pajero Fuel Economy - Will Gas Conversion Help?

Post by Kdub »

Giday people...

I LOVE my PJ (96 JN 3500 Auto), and have had it for about two years now, but i am beginning to hate the fuel bill.
Has anyone Converted to gas to save on running costs? What about other mods to save on fuel? (a friend put in a different air filter, and one of those hurricain things on the air intake and said it helped)

If n e 1 has some more info, that would be great.

Cheers..

Kent
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Hi,

it can take 5 - 10 years, maybe longer, to recover the initial cost of installing LPG, and can cost a lot more if the engine deteriorates because of the LPG (no upper cylinder lubrication in LPG)- and if they keep fiddling the tax law with respect to LPG, there may be less and less benefit in the future. Aftermarket air filters, inlet air cyclones etc make big claims but generally do not deliver much if anything. the best ways to improve your fuel economy is to revise your driving habits - keep the engine in its torque band - peak efficiency is near peak torque - keep your tyres pumped up, take off roof racks, don't carry unneccesary junk in the car, drive smoothly. at the end of the day you're driving a 2 ton truck with a big petrol engine and the aerodynamics of a brick - anything under about 17 litres/100km around town and maybe as good as 13 - 14 on the highway would be considered excellent. if you drive like a hooligan, always stomping the pedals hard, it will send your fuel bill up dramatically.

you MIGHT also benefit from exhaust modifications and computer re-tuning (unichip etc) but these are big dollar items more aimed at power production than efficiency.

the bottom line is, big, petrol powereed 4WD's use a lot of fuel - you either have to accept it or trade it in for a lancer.

what sort of fuel economy do you get? do you keep figures or is it just a general feeling that it's using too much? what sort of driving do you do - highway - traffic - off road?

cheers

Brian
Free air locker to the first 20 callers!
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Brian pretty well nailed it on the head cost wise..... so here's a tip that will save a heap of bucks if you decide to go the LPG way.....

BUY A 2nd hand unit !!!.... they are regularly advertised in all the usuall places and a complete setup can be snapped up for under $250 !!!!

They rarely have problems mechanicly speaking but the tanks do have a small problem of recertification dating..... again there IS a cheaper alternative ...... get a retested and certified unit.... they are about 1/2 the cost of a new tank !!!

All ya really need is.....
LPG tank ---- ( the best size to fit ya rig)
mounting brackets for the tank.
filler pipe and bowser conector.
long bit of either copper pipe or flexy hose ( pends on state regs )
LPG lockout valve
converter
hose from the converter to the mixer
mixer
mixer addaptor plate to suit the carby on ya motor
petrol lockout valve
about 3 metres of 5core trailer flex to wire it all

most of the stuff comes with 2nd hand kits so ya laughing !


A local car wrecker sells LPG kits for $100 provided you pull it out .... A hundred bucks and a w/end doing it all is a hell of a lot cheaper then a brand new system

Kingy

p/s....
try a place that crushes cars up ..... they are not allowed to crush em if a LPG tank is fitted ;) ..... I picked up a 130 lit tank for free a few months back and it still has 9 years of usable date left :D
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Being an EFI engine I imagine there would be a lot more involved than the above post due to the EFI computer most likely controlling the ignition timing etc.

Usually AFAIK some sort of interface computer is needed?
David
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

usually comes with a 2nd kit aswell !!!!!

must remember that alot of EFI motors are now at the wreckers too :D
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

even if it didn't, it wouldn't be too difficult to booty fab something to shut off the EFI - would just need a relay to lift the injector earth + shut off fuel pump when the engine is switched to LPG.
Free air locker to the first 20 callers!
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Its a good idea too leave the fuel pump operating when on LPG. This keeps the fuel rail and injectors cool and allows for easier change over from LPG to petrol on the move...
EFI\LPG systems also are required to use a feed back system for LPG mixture control. This uses a stepper motor to operate a valve in the vapor line and is controlled by the oxy sensor.
This needs to be done for certification.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

V8Patrol wrote:usually comes with a 2nd kit aswell !!!!!

must remember that alot of EFI motors are now at the wreckers too :D


A 3.5 litre Pajero engine on gas at a wrecker with all the bits still intact for the gas system? Don't like your chances of finding that! :D
David
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

DAZZ wrote:Its a good idea too leave the fuel pump operating when on LPG. This keeps the fuel rail and injectors cool and allows for easier change over from LPG to petrol on the move...
EFI\LPG systems also are required to use a feed back system for LPG mixture control. This uses a stepper motor to operate a valve in the vapor line and is controlled by the oxy sensor.
This needs to be done for certification.


Except if you bleed the fuel dry and the pump runs without fuel in it and burns out due to lack of lubrication

Tom
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Also the fuel cotinually being pumped arround has a tendancy to go flat
quicker then if it's just siting in the tank.
J Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

J Top wrote:Also the fuel cotinually being pumped arround has a tendancy to go flat
quicker then if it's just siting in the tank.
J Top


well normally it doesn't have anywhere to go because you usually but a fuel lock on the end of the fuel line in the engine bay
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

On an EFI vehicle the fuel is pumped back to the tank via the return line as is normal. It is also a requirment for certification that the fuel pump operates when on LPG. Look in most EFI\LPG vehicles and there will be a sticker stating that a 1\4 tank of petrol minimum be maintained at all times. All EFI\LPG vehicles also are required to be auto change over. Start on petrol and auto switch over to LPG.

Some people may not do this or agree with it but these are the Vic regulations for LPG conversions......
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

I agree dazz, when thinking about it this is the most logical method - makes the cutover very simple as all that is required is lifting the injector ground once the engine has started, keep fuel pressure up if there is a need to cut back to petrol running, prevents vapor locking the fuel rail. a trained monkey could wire it up.

anyway to point the whole thread back in the direction it came from, my personal opinion is that there's not much to be gained from installing LPG unless you're capable of finding a second handie, installing it yourself and getting it certified.

the best ways to improve fuel economy are:

drive smoothly and slowly
buy a diesel
buy a smaller car
Free air locker to the first 20 callers!
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

dumbdunce wrote:
anyway to point the whole thread back in the direction it came from, my personal opinion is that there's not much to be gained from installing LPG unless you're capable of finding a second handie, installing it yourself and getting it certified.

the best ways to improve fuel economy are:

drive smoothly and slowly
buy a diesel
buy a smaller car


Very true,

one thing with the fuel, most installs I have seen have a fuel prime
setup where there is a momentary contact button that you can hold down to prime the fuel system before you switch over, however I didn't use that in my old carby setup, just cut over on a long down hill streach of road
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests