Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power window kits and electric door releases

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Power window kits and electric door releases

Post by DionM »

Anyone know whatever happened to the power window kits that Jaycar used to sell? Wouldn't mind putting a pair in my new project (81 Range Rover).

Similarly, anyone ever played with electric door releases? I notice Jaycar sells the little solenoids, primarily intended for boot releases, but I figure one could be rigged up to replace the door handles.

If you don't see what I'm getting at, I'm not at all enamoured with the standard door trims ...
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Most car audio/ alarm places should be able to sell you electric window kits.
David
Posts: 251
Joined: Sat Mar 06, 2004 6:16 pm
Location: Melb. Victoria

Post by savage »

murcod wrote:Most car audio/ alarm places should be able to sell you electric window kits.


any specific ones u know of, coz autobarn told me that they dont seel em nemore and prob will never again
I Have a Hilux, Its nothing fancy, but it gives me plenty of fun!
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Post by pcman »

imo the aftermarket power windows kits are crap they dont last long i installed a set in my brothers gemini about 2 years ago and there now dead wont wind down wont wind up so there being removed and the winders put back on

you can get electronic door releases from usa but there $$$ look for door poppers you gotta both unlock the door then push the door open and on a 4x4 with a heavy door thats gonna need some decent power

ive been tempted to do both these on my cortina but cant afford the $$$ to do em properly i was planing on modding a set of factory power windows outta a falcon to fit inside the cortinas doors but lost intrest in the project

best of luck
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Whatcha want is stock electric windows from a wrecker, if there are any that fit your car (there'd have to be for a rangie wouldn't there?)

The aftermarket ones will suck.

If you hate the door trims that's okay, you can set the switches up in some different way.

Forget getting rid of the door handles. It's too hard.

Jason
This is not legal advice.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest