Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How Would It Hold???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

How Would It Hold???

Post by Aza »

how would a fj45 tray back with standard axles, cv's, etc hold with running 48" tyres and 6.1 gears :?:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

im guessing it wouldnt
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

thats what i thought....
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

az

Post by humphey »

just do it ,if it brakes make it stronger ;) :armsup: :armsup:
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

let bj do what he wants aza, i hope hes got plenty of money saved for replacing axles :armsup:
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

what ya sourcing the 6:1 gears from?
Spit my last breath
Top
Posts: 357
Joined: Fri Nov 07, 2003 3:30 am
Location: Mount Beauty

Re: az

Post by Trusa »

Why keeping it stock?

Will take a fair bit of modding to get 48s (?) under a stock cruiser.

Would like to see finished!!
Last edited by Trusa on Fri May 21, 2004 5:59 am, edited 1 time in total.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

bad_religion_au wrote:what ya sourcing the 6:1 gears from?


Toyota Stout ;)
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

antt wrote:let bj do what he wants aza, i hope hes got plenty of money saved for replacing axles :armsup:


he's ganna do it anyway :lol: ohh well its his money to waste... be funny if it did acturlly hold :shock:

u get an :armsup: for effort bj :finger:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

wont be that much worse than 42s. i recon bout 15% more strain.

i believe in you bj :finger:
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Re: How Would It Hold???

Post by RUFF »

Aza wrote:how would a fj45 tray back with standard axles, cv's, etc hold with running 48" tyres and 6.1 gears :?:


What tyres come in a 48" size?
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

truck tyres
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

aza there wont be room in the shed for yours and your brothers junk!


NICK
TECH SCREW GURU
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

Can't remember where but I have seen a pic of cheezy's rig with 48's and I think they were swampers.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

basketcase wrote:Can't remember where but I have seen a pic of cheezy's rig with 48's and I think they were swampers.


47" Claws maybe?
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

RUFF wrote:
basketcase wrote:Can't remember where but I have seen a pic of cheezy's rig with 48's and I think they were swampers.


47" Claws maybe?


You could be right. It was a pic from a car show or something like that in Melbourne. Before he chopped the back off.
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

NICK wrote:aza there wont be room in the shed for yours and your brothers junk!


NICK


mate we can fit mine and bubs shit, plus a trailer, plus 2 other cars :twisted:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

Aza wrote:
NICK wrote:aza there wont be room in the shed for yours and your brothers junk!


NICK


mate we can fit mine and bubs shit, plus a trailer, plus 2 other cars :twisted:



:cry: :cry: we got 2 car spaces and 8 cars.


NICK
TECH SCREW GURU
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Re: How Would It Hold???

Post by 4sum4 »

RUFF wrote:
Aza wrote:how would a fj45 tray back with standard axles, cv's, etc hold with running 48" tyres and 6.1 gears :?:


What tyres come in a 48" size?


Don`t ground Hawgs come in that size :?
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

RUFF wrote:
basketcase wrote:Can't remember where but I have seen a pic of cheezy's rig with 48's and I think they were swampers.


47" Claws maybe?


They were 49" x 21" claws on a 15" rim, there was a whole lotta sidewall!!
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

anyone got a pic? arrhh... better make that a link?
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

tyres

Post by DIRTY ROCK STAR »

so will that be the new benchmark- 49" rubber.

at the moment it seems 44" rubber is what everyone aspires to and what the BIG $ trucks have.

sounds like in 12 months the really serious $ rigs will be running 49" or 48"???

the next step after that will be????
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

RUFF wrote:
basketcase wrote:Can't remember where but I have seen a pic of cheezy's rig with 48's and I think they were swampers.


47" Claws maybe?


46s? (they dont make a 47!) :armsup:
hands and mums dont count!!!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

bj on roids wrote:
RUFF wrote:
basketcase wrote:Can't remember where but I have seen a pic of cheezy's rig with 48's and I think they were swampers.


47" Claws maybe?


46s? (they dont make a 47!) :armsup:


Who cares they are a crap tyre anyway :D
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests