Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sway bars on or off

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

sway bars on or off

Post by bagsy »

Ive been experimented with taking the sway bars off but im getting to much flex and am rubbing gaurds....Ive got 3 inch susp,2 inch body and 35 simex et s. Was thinking about putting them back on and just lengthen the sway bar supports. Any body got any other ideas..... shane
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Sorry but what kind of car?
This is not legal advice.
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

im running a GQ with 6" spring lift, and i run no swaybars, and love it, okay its definatly no sports car, but i dont mind, i get a fair bit of tyre rub in the rear guards, but, once again, im not fussed, just respray it evry now and then.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I run the thin early GQ bars on mine. Have done on 2 GQ s (Mavs) now.
I get good articulation and can reach bump stops on full artic.
Ive extended the links at each corner .
Rides good on bitumen and off rd.
Passed the engineers swerve test.

Bazzle
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

I agree with Ozzy,

I've got a 4" sus lift and 2" body lift and trimmed the rear guards and don't rub the 35 MTR's at all with no sway bars. On road it ain't no sprts car, but who'd drive it like one??

Lose the bars and slow down on road.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Would it help havin toyota offset rims??

as they put the tyres an inch outwards (correct me if wrong)

Less rubbing??

Swaybars in my opinion arnt needed if you have a good spring shock combo.

TOM
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Swaybars?? ahhhhhhh yes the things hanging in the shed..
Top
Posts: 56
Joined: Mon May 17, 2004 8:44 pm

Post by sideways »

the frist thing i did was take them off i run 36 swampers and dont scrub any where
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

I had none when I first got my Mav. It was great for the offroad stuff, but got scary when at speed on the highway on the way to Landcruiser Mountain park. Particuarly over the range. I found that the rest of the guys could take the corners at a "normal" speed where I had to slow down a fair bit. So I put the front one back on with new links made from some booker rod and a couple of heim joints. There is no discernable difference off road and it now feels safer on the black stuff.
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

loose the swaybars!
Gq ute new built
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

bogged wrote:Swaybars?? ahhhhhhh yes the things hanging in the shed..


you selling yours too !!! :D



loose em........ they are overrated !
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

hey guys , sorry ,yeah its a 93 gq lwb, and im running the toyota offset rims. Also its duel fuel so i have that huge belly tank just infront of the rear diff and on full flex the top trailing arm hits the tank aswell. Think im gunna extend the sway bar connecters for now to the length that it just misses every thing. thanks shane...
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

bagsy wrote:hey guys , sorry ,yeah its a 93 gq lwb, and im running the toyota offset rims. Also its duel fuel so i have that huge belly tank just infront of the rear diff and on full flex the top trailing arm hits the tank aswell. Think im gunna extend the sway bar connecters for now to the length that it just misses every thing. thanks shane...


Get the tank notched to crear the trailng arm.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

ask around about getting the tank trimmed so that the upper trailing arm dosnt hit and think about extending your bump stops or weld a 1 inch plate onto the top off your diff where the bump stops touch.
Top
Posts: 134
Joined: Tue Jul 22, 2003 9:34 am
Location: Wollongong, NSW

Sway Bars

Post by John H »

I have a sway bar on my Mav with some disconects for on the trail — works fine for me. Rides better on road — especialy with 7inch lift + 3inch body lift and flexes well off road once disconected.
Mine uses the thin sway bars off an 89 Mav/Nissan but I was wondering if beafier ones are available. I think mine are around 15mm dia. If there are stiffer sway bars, which year models were they on?
As soon as it was made idiot proof, someone went and designed a better idiot.
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Re: Sway Bars

Post by hottiemonster »

John H wrote:I have a sway bar on my Mav with some disconects for on the trail — works fine for me. Rides better on road — especialy with 7inch lift + 3inch body lift and flexes well off road once disconected.
Mine uses the thin sway bars off an 89 Mav/Nissan but I was wondering if beafier ones are available. I think mine are around 15mm dia. If there are stiffer sway bars, which year models were they on?


geez, what tyres are you running offroad?
Gq ute new built
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Sway Bars

Post by bogged »

hottiemonster wrote:
John H wrote:I have a sway bar on my Mav with some disconects for on the trail — works fine for me. Rides better on road — especialy with 7inch lift + 3inch body lift and flexes well off road once disconected.
Mine uses the thin sway bars off an 89 Mav/Nissan but I was wondering if beafier ones are available. I think mine are around 15mm dia. If there are stiffer sway bars, which year models were they on?


geez, what tyres are you running offroad?



750Rx16s
Top
Posts: 134
Joined: Tue Jul 22, 2003 9:34 am
Location: Wollongong, NSW

Re: Sway Bars

Post by John H »

hottiemonster wrote:
John H wrote:I have a sway bar on my Mav with some disconects for on the trail — works fine for me. Rides better on road — especialy with 7inch lift + 3inch body lift and flexes well off road once disconected.
Mine uses the thin sway bars off an 89 Mav/Nissan but I was wondering if beafier ones are available. I think mine are around 15mm dia. If there are stiffer sway bars, which year models were they on?


geez, what tyres are you running offroad?



Who me?
I'm running 35's — the 3inch body lift is just there to add clearence under the sills and allow for flex in the suspension.
As soon as it was made idiot proof, someone went and designed a better idiot.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Easier to find on GU, all have stiffer ones. GQs varied only a little in size.

Bazzle
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

Thanks for the input guys...

and nice hijack hottiemonster !!!!
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

talking to brent from wizard yesterday and he has just sourced a swaybar from a series 3 GU which are much thicker than earlier models and he is gunna put it on his blue ute with the 8" lift and five link for high speed work.
he then just uses the disconnects and has the best of both worlds.
Image
Image
Image
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

hey guys , sorry ,yeah its a 93 gq lwb, and im running the toyota offset rims. Also its duel fuel so i have that huge belly tank just infront of the rear diff and on full flex the top trailing arm hits the tank aswell. Think im gunna extend the sway bar connecters for now to the length that it just misses every thing. thanks shane...


Top arms hit tank due to shock droop not swaybars.
Remove tank go to Brown Davis or Longranger and get it modded. BD did mine a few years ago for $80. When I had a gas Mav.

Bazzle
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

bazzle wrote:
bagsy wrote:hey guys , sorry ,yeah its a 93 gq lwb, and im running the toyota offset rims. Also its duel fuel so i have that huge belly tank just infront of the rear diff and on full flex the top trailing arm hits the tank aswell. Think im gunna extend the sway bar connecters for now to the length that it just misses every thing. thanks shane...



Top arms hit tank due to shock droop not swaybars.
Remove tank go to Brown Davis or Longranger and get it modded. BD did mine a few years ago for $80. When I had a gas Mav.

Bazzle


Brown Davis, they are in Holloway Drive, Bayswater aren't they?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

Thanks bazzle , yeah been playing about again today , and think its a good idea to modify the tank because the trailing arm really leans on it . Flex is great without the sway bars on though......shane
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests