Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Got Width...

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Got Width...

Post by JK »

Pics of some bootie mods to a 4b tractor used for railway construction...

I bet they will have problems with the steering links etc. There will be some huge forces being fed back thru the steering with all of that leverage...
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

Cool it's a chode! But there's not a lot of clearance underneath considering the height of the tyres.
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

A couple more...

Post by JK »

:shock:
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

What's a chode???

Considering that Val ( the guy dredssed in black) stands about 6'3", the front tyres would be about 62" (rears about 75"+) . Ground clearance would only be about 22"... Pretty close to what you will be getting with your Portals and 38s :D
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

And gearing that most of us dream about.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

It must be local lingo. When I was in highschool it refered to a penis that is wider than long. Haha :rofl:

That tractor reminds me of a crab.

Clearance will roughly be half of the tyre height. So 19" with 38" baby yeah! :)
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

have heard of choad

also, hows yur scrub radius?
????

man WHY?
hands and mums dont count!!!
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Why???

Post by JK »

I don't think that they have worked out the ackerman to well, it would be pretty dodgy turning that beast, but I bet it could out-perform just about anything on a side slope :)

It has been widened so that it can straddle a railway track and run with the a tyres on the formation either side of the ballast (rocks under the sleepers). They use it to pull 144m lengths of rail off the end of a works train and out along the track.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

its probly not going fast enough or steering enough to make a difference
hands and mums dont count!!!
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

Yeah, plus running on loose ballast, dirt roads and mud, the tyres can slip around a fair bit.

I still reckon there would be a heap of stress on the steering linkages / ram etc.

BTW, did you get the vids?
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

the ram wont feel it

the kingpin bearings would, and i wonder if the pump might!!

yeah i got anotehr 20meg of videos :roll: (they all seem to send twice for some reason)

but yeah, the chat ones are only coming once???? weird huh!!
hands and mums dont count!!!
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

:2gunfire: IT Guy...

I have alerady followed that up with him... sorry about that.
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

DirtPig, did I get vids? What are they?
BJ, where is the 350 Sammy roll vid?
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

Nam, I sent them to your work email...

I can send you the sammy one as well.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

sorry you two guys i only wanted to send it once, so i was waiting for everyone to email me, i sent it about 6 hours ago!!

nam_tran (that one)

anyways boys.....its all done now

so am i to understand some hong kong or malaysian locals have bootie fabbed those wheel spacers and have yet to use them?

keep an eye on it, and get some photos of the kingpin knuckles when the bolts break!!
hands and mums dont count!!!
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

Yeah cool thanks guys. Hehe yeah take photos if things break!
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

Chode. The peice of skin between your scrote and your a$$hole. Got it on good authority too. An old mate that likes to make up shit.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

First Post

Post by Shorty40 »

Hybrid wrote:Chode. The peice of skin between your scrote and your a$$hole. Got it on good authority too. An old mate that likes to make up shit.


Hows this for your first post ??? :oops:
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

I was trying to be gentle, being my first time and all. :oops:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 156 guests