Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

more lift

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 153
Joined: Tue Apr 20, 2004 8:56 am
Location: Sydney

more lift

Post by Luv to 4B »

I currently have a 2" spring lift and 31's and they rub on the back part of the inner guards on compression. I want to go to 33's but dont want to do a body lift. other than extended break lines what are the consequences of putting lift blocks under the springs front and rear. Is this the best way to go. Any suggestions or advice would be appreciated.
My mind is like a steel trap....quite dangerous because i forget where i left it.
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

Lift blocks under the front bad

i had 33's with 2" spring lift and no body lift with no rubbing - fitted up a 35 on the front and again no rub - it is all about the positioning of your front axle ;)

http://www.outerlimits4x4.com/PHP_Modul ... lling+axle - heres when i did my old 4 runner
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Wouldn't axle wrap be a problem?
Where the f#@k did that come from
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests