Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lift spindals

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

lift spindals

Post by NICK »

does anyone know of any company in australia that does lifted spindals?


NICK
TECH SCREW GURU
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

s

Post by humphey »

what sort of car/rig :?
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

2wd rodeo
TECH SCREW GURU
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Post by TWISTY »

These guys at the Goldie do them for Hilux's, not sure about the Rodeo's but??

http://www.burnincustoms.com/

Could also try
http://www.aussiesporttrucks.com/
they import a lot of truck stuff so might be able to help.

Hope that helps
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

POSER :finger:






















anyway, is it the 4cylinder model or the v6? cause the v6's sit at the same height as the 4wd ones, so maybe ya could swap the v6 suspension under it if its only a 4
Top
Posts: 1494
Joined: Mon May 24, 2004 5:21 pm
Location: Bris, or under the sea

Post by Going_up »

dont you mean drop spindles
If at first you dont succeed... Skydiving is not for you!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

No he has a 2wd Rodeo that he wants to Lift not lower.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

Going_up wrote:dont you mean drop spindles




no i mean 150km/h down a dirt road doing jumps :D :D
.


NICK
TECH SCREW GURU
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

antt wrote:anyway, is it the 4cylinder model or the v6? cause the v6's sit at the same height as the 4wd ones, so maybe ya could swap the v6 suspension under it if its only a 4




yeah that would work, and i would end up with the same suspension that i have now :finger:

althou the torsion bars are alot stiffer.



NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests