Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ instrument cluster problem

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

MQ instrument cluster problem

Post by slacker »

All right guys i have another problem. The gauges on the dash stopped working, the battery one still works but the other ones don't. They went on and off a couple of times but now nothing. I tried the dash off my other MQ and the same thing happens. This dash worked fine until i pulled some plugs underneth the drivers seat on that 4be for body repairs. I will look around that part in the new car and hope i can find some answers.

If anyone has this problem before or seen anything like it, help would be greatly appreciated.

thanks

Sacha
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Post by Shark »

Dude had the EXACT same problem not two weeks okay. Turned out that a couple of plugs near the battery on the drivers side were gunked up and all corroded.

Marc
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

Post by slacker »

ill check the battery clamps then, but i think i have fixed it, the fuse for the radio and cigarette lighter was blown. i replaced it and it seems to be working again.
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

Post by slacker »

yeah my dash is still in intermitant mode with the 3 gauges, i will buy some contact cleaner tomorrow and clean heaps of plugs.

if that fails, can anyone make a suggestion on where else i can look?
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

Post by slacker »

if anyone is interested it was the 12v fuses in the fuse box. they were old and not making good contact. Well thats what a auto electrician said after he fixed it.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest