Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Highmount 8274
Moderator: -Scott-
Highmount 8274
I have an old highmount with solonoids on the winch itself and want to fit a control switch in the cab aswell as one on the front off the car,What do I need And how do I do it.CHEERS.
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
I think you mean solonoid box is mounted to winch (I thought all hi mounts were 
) But you said old which is easy (and better as they have better solonods)as there are only 3 wires; power, in & out. So get some trailor flex and some spring switches that don't stay on and you'll be laughing. Pick up the power from the solonoid box, sort out what is in by using remote, the 12volt will liven up one set of solonoids then vica versa for the in, wire up the switch and your done. I recommend using the remote you have rather than having one mounted on bullbar. It's easier, less to go wrong, you should allready have one and it can be opperated from side of vehicle.
) But you said old which is easy (and better as they have better solonods)as there are only 3 wires; power, in & out. So get some trailor flex and some spring switches that don't stay on and you'll be laughing. Pick up the power from the solonoid box, sort out what is in by using remote, the 12volt will liven up one set of solonoids then vica versa for the in, wire up the switch and your done. I recommend using the remote you have rather than having one mounted on bullbar. It's easier, less to go wrong, you should allready have one and it can be opperated from side of vehicle.80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
Who is online
Users browsing this forum: No registered users and 0 guests