Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need an opinion

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Need an opinion

Post by My Lil Lux »

Have put new OME springs in front of lux, already had 50mm Ext Shackles and have dropped the front spring hangers 50mm to improve caster on front tail shaft. After 3 weeks OME's are looking worse than the old OME springs they replaced, The shop that sold them is blaming it on the spring wedges i have in their, but i fail to see how they are causing this, If anyone can tell me if I'm wrong and thier right let me know, as they are not keen to do anything, or any other ideas on how to correct this let us know thanks.
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

so they are sagged already?
Top
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

yeh and they have made an S across the axle, I know lux's sit flat on the axle, but these have like a u behind the axle, they haven't been off road, also I had an adjustable Torque rod on which has bent like a banana since these springs were put on, the car is sitting about 30mm lower than when they went in.
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

Hmmm... that sounds pretty serious.
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 4 guests