Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Electronic Dizzy??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Electronic Dizzy??

Post by Screwy »

Hey all,

Just got a new 308 Holden V8 fitted to the Patrol again ( since the other went met with the devil ) and i got it all tuned up ( duel fuel ) yesterday. The guy who did it told me i have a cracked diamphram in the dizzy vacuum advance unit. He adjusted the timing to suit but i want to fix it.

It will cost me $60 for a new vacuum advance unit to get fitted to the standard dizzy OR i can spend $200 and get a complete electronic dizzy with cap and coil and everything.
Wat are the pros and cons of going to Electronic dizzy?
Or should i stick with astandard dizzy and get a new vacuum advance unit?

ALSO, i got told to use a Ford rotor button with this electronic dizzy in the holden, can anyone give me any info about this?

cheers

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

If your handy with adjusting a points dizzy then stick with it as they need to be real bad to not work at all out in the middle of knowhere.
The electronic dizzy is fairly reliable and usually only fails when the Ignition Module burns out. But they are not very expensive new and are easy to replace so carrying a spare is easy.
The only reason you use a ford rotor button is so you can use the small early dizzy cap.
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

aahhh is the rotor i need out of a standard 4 litre like an EB???

also i thought u just needed and electronic dizzy and the appropriate coil.
where does the ignition module fit in?

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Screwy_ScrewBall wrote:aahhh is the rotor i need out of a standard 4 litre like an EB???

also i thought u just needed and electronic dizzy and the appropriate coil.
where does the ignition module fit in?

screwy


Its usually a V8 ford rotor botton that is used. There may be another set up im not aware of.

The ignition module is on the side of the dizzy under a tin cover.
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

got ya thanks.

Is there any large bonusus performance wise with an electronic dizzy?

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

They do supply a cleaner spark but unless you are going to rev it real hard all the time a points set up will be fine.

I run a points dizzy in my 3.9 and it had an electronic one in it originaly
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

ok ill give it some thought.
thanks ruff

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

I have an electronic dizzy on my 253 and I cant say I noticed any huge gains.

I had to change to the smaller cap (due to space restrictions) but am unsure as to which rotor it has :?
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

yeh, space restrictions is y i have to go back to the small dizzy cap and apparently the holden one wont fit in there, so a Ford one has to be used........
Apparently there is a difference on LPG. It runs much smoother on LPG. Is this correct?

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Shorty40 wrote:I have an electronic dizzy on my 253 and I cant say I noticed any huge gains.


Never have to change points or condensor ever again..... set and forget :armsup:

I ran one with the 253 and then again in the 308. never gave a single problem and worked real well in river xings, whereas the old points dizzy gave heaps of probs when ever it looked looked getting damp......

worst thing about the electronic dizzy is the module....if it goes ya stuffed, so carry a spare.
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

If you change over to electronic make sure it hasn't got an optical pick up in it.

Hall effect pick ups are a lot better and more reliable.
David
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

V8Patrol wrote:
Shorty40 wrote:I have an electronic dizzy on my 253 and I cant say I noticed any huge gains.


Never have to change points or condensor ever again..... set and forget :armsup:

I ran one with the 253 and then again in the 308. never gave a single problem and worked real well in river xings, whereas the old points dizzy gave heaps of probs when ever it looked looked getting damp......

worst thing about the electronic dizzy is the module....if it goes ya stuffed, so carry a spare.


I agree, ease of maintenance is a huge benefit :cool: Although I didn't get the extra 120hp I was hoping for :lol:
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

its much better for gas setups as it prodvides a stronger spark and gas will work much better with better spark thats why newer cars play up n gas when you have faulty leads or dirty plugs they tend to back fire and miss. also the electronic dizy wont break down in the higher revs like a pionts one will
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Talking V8 Dizzie's the Bosch electronic dist has a different size shaft and locating system for the rotor button than the points style dist. All Holden factory electronic dist used the bigger diameter cap to prevent x-tracking of the spark. Ive used the early Holden cap with the Ford rotor button the Ford cap will fit and is very similar except were the spark plug lead fits the cap the Ford has a bigger boss and lead boot to suit. With the early Holden cap an early Holden lead set will fit fine. Ive had custon lead sets made up by Ignition Developments and he recomends the Holden caps as there are better boots available for the smaller boss Holden type caps.
:cool: :cool:
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

jsdfk

Post by mav »

don't forget to include the price of getting the new dizzy advance curve adjusted to suit your motor.
see ya mav
Posts: 115
Joined: Thu Aug 21, 2003 3:42 pm
Location: Moved ages ago, ifyou know me you'll know where

Post by Steven »

I had a elect dizzy on a fairlane i had... worked great till the bushes in it wore a bit. then it stoped turning and the engine kept going.. for a lil bit.. result..

broken gear on the bottom, and a broken cam..

great dizzy, but watch for wear...


Steve
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

Go the electronic,

Better starting, economy, better in water, I've swapped the dizzy on 3 different Holden 6's and never regreted it and kept the original rotor, couldn't see why the V8 would be different.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests